Table of Contents
Advertisement
Quick Links
Owner's/Operator's Manual
Please read this manual "before" unpacking or using this implement for the first time.
This manual provides you with the necessary instructions to safely install and use your
purchase.
Do not let other people use this attachment without first being
instructed how to safely use it.
Spartan Equipment
Single & Dual Motor
Tillers Pro Series
For safe operation, read these
rules
and
carefully to avoid acSpartan
Equipmentents that could result
in Death or Serious Injury.
TO THE OWNER/OPERATOR OF THIS IMPLEMENT
instructions
PAGE 2
Tillers
July 2016
Advertisement
Chapters
Table of Contents
Summary of Contents for Spartan Equipment Tillers Pro Series
- Page 1 Single & Dual Motor Tillers Pro Series Owner’s/Operator’s Manual For safe operation, read these rules instructions carefully to avoid acSpartan Equipmentents that could result in Death or Serious Injury. TO THE OWNER/OPERATOR OF THIS IMPLEMENT Please read this manual “before” unpacking or using this implement for the first time.
-
Page 2: Information
Information Record product information here for future reference. Model () Low Flow (14-20 GPM) High Flow (20-40 GPM) 72” 72” 84” S/N & MFG. Date Date of Purchase Spartan Equipment PAGE 3 Tillers July 2016... -
Page 3: Table Of Contents
Limited Warranty......20 Will result in Death or Serious Injury. Could result in Death or Serious Injury. Could result in Minor or Serious Injury. Spartan Equipment PAGE 4 Tillers July 2016... -
Page 4: Operator Safety Training Tips
When transporting the implement, 1800 lbs. and with a weight of at least keep a safe speed to avoid losing 6500# with the bucket removed. A skid control of the attachment or prime mover. Spartan Equipment PAGE 5 Tillers July 2016... -
Page 5: Unpacking Your Shipment
S k i d S t e e r hydraulic system. (High Flow Tiller) Never enter the Never operate this tiller without the area underneath the coupler or any Spartan Equipment PAGE 6 Tillers July 2016... -
Page 6: Pre-Operation Walk-Around
Take care of our to the tiller. environment. Repair any Allow the tiller to run for 30 hydraulic leaks. seconds to purge the air from the system. Turn off the tiller drive, Spartan Equipment PAGE 7 Tillers July 2016... -
Page 7: Starting The Tiller
RPMs to an idle, and allow the engine is bogging down or if the tiller tiller to slow down. After the tiller has speed is turning too slow because of slowed down you may turn the Spartan Equipment PAGE 8 Tillers July 2016... -
Page 8: Adjusting Tiller Depth & Level
Use care when flow required for this attachment. operating on uneven terrain or any type of sloped surface. Keep your tiller First Pass Spartan Equipment PAGE 9 Tillers July 2016... -
Page 9: Maintaining Your Attachment
If the tiller speed slows down, New tiller blades will cut more efficiently than worn or bent tiller reduced your travel speed and blades. allow tiller to reach the proper rotating speed. Tilling too fast in Spartan Equipment PAGE 10 Tillers July 2016... -
Page 10: After Every Season
Identify the worn or broken tine that needs to be replaced. Remove the two sets of hardware securing the tine to the rotator shaft. Spartan Equipment PAGE 11 Tillers July 2016... -
Page 11: Hardware Torque
Grade 2 Grade 5 Grade 8 lb-ft lb-ft lb-ft ¼” 5/16” 3/8” ½” ¾” 7/8” 1” = inch pounds Higher torques may require the use of a torque multiplier. All values are “dry” torques. Spartan Equipment PAGE 12 Tillers July 2016... -
Page 12: Parts
Implement Model Number Implement Serial Number Cut Width Parts Manual Date (lower right corner) Parts Manual Page Part Description Quantity Required Ship-to Name & Address Payment Method Use Genuine Parts from Spartan Equipment Spartan Equipment PAGE 13 Tillers July 2016... -
Page 13: Tine
S p e c i f y W i d t h , G P M r e q u i r e m e n t s w h e n o r d e r i n g p a r t s Spartan Equipment PAGE 14... - Page 14 S p e c i f y W i d t h & G P M m o d e l w h e n o r d e r i n g p a r t s Spartan Equipment...
- Page 15 (Warning, Do Not Exceed 20 - 40 GPM) (Note: Select proper decal for your model Decal, Warranty Instruction Decal, Made in the USA Replace any worn, torn or missing safety decals before operating! Spartan Equipment PAGE 16 Tillers July 2016...
-
Page 16: Troubleshooting
Dual motor models – hoses Switch motor hoses on one at one or the other motors motor. incorrectly connected Motor output shafts failed Call your dealer for further recommendations. Spartan Equipment PAGE 17 Tillers July 2016... -
Page 17: Specifications
No. of Tines Hyd. Flow 14-20 GPM 20-40 GPM Requirements (53 - 76 L/m) (76 – 151 L/m) Max. Pressure 3000 PSI (206 Bar) Relief Attachment 750 lbs. 801 lbs. Weight (340kg) 363kg) Spartan Equipment PAGE 18 Tillers July 2016... - Page 18 Think Safety Every Day! Spartan Equipment PAGE 19 Tillers July 2016...
- Page 19 Notes Spartan Equipment PAGE 20 Tillers July 2016...
-
Page 20: Limited Warranty
(12) month warranty period. All defective parts must be routed directly to SPARTAN EQUIPMENT, Inc. with freight or delivery charges to be prepaid. This Limited Warranty shall not be interpreted to render SPARTAN EQUIPMENT, Inc. liable for any injury or damage to persons, business or property of any kind nor expenses or losses incurred for labor, supplies, substitute machinery rental, or for any other reason.
Need help?
Do you have a question about the Tillers Pro Series and is the answer not in the manual?
Questions and answers