APPLICATION INFORMATION This winch is designed to move a load at ground level or up an incline. It is neither designed nor intended for lifting. This winch is not to be used to lift or move people. DOUBLE LINE This winch is for intermittent use due to heat build up characteristics of various components.
Step (1) Mount the winch to a firm base. Be sure that your structural support is 10. AVOID CONTINUOUS PULLS FROM EXTREME ANGLES as this will cause strong enough to support the rated pulling forces of the winch. the metal or synthetic rope to pile up on one end of the drum. This can (Attach Fairlead to the mounting plate with two bolts.) jam the metal or synthetic rope of the winch.
Page 4
Clutch Operation OPERATION OF WIRELESS REMOTE ...----- Frees pool Before you begin, you should familiarize yourself with Engaged our Wireless Remote Control and each of its functions. Note: Turn off the remote to extend the battery life. Clutch must be fully engaged before winching. Never CAUTIONi engage clutch knob while drum is turning.
Never touch the metal or synthetic rope or hook while they are in Troubleshooting VDanger tension or under load. Even at rest, the winch may have When the winch fails to operate after several attempts, or if there is any fault operation the metal or synthetic rope in tension.
Page 6
RIGGING RIGGING 3. Figure 18 illustrates the most commonly used rigging. A nylon sling is used 5. Figure 20 illustrates the use of a pulley block to change the direction of to protect the tree when it is used as an anchor, and the metal or synthetic the pull.