BMW 740i Owner's Manual page 93

or lamp
The indicator light in the instru-
ment cluster goes out shortly af-
er you switch on the ignition.
page 21.
r lamp flashes:
tem is actively regulating drive
n response to monitored vehicle
ng conditions.
dicator lamp fails to go out after
ne is started, or if it comes on
normal driving:
stem has not been deactivated,
a system malfunction. The vehi-
ains operational, but without
DSC. Consult your authorized
enter for repair.
ctivate the system
he button. The indicator lamp
me on.
ing on equipment options, the
s marked with ASC or DSC.
activated ASC+T/DSC you are
with conventional, unregulated
ransfer.
All manuals and user guides at all-guides.com
We recommend that you deactivate the
system for increased traction:
> When rocking the vehicle or starting
off in deep snow or on loose surfaces
> or when driving with snow chains.
Refer also to page 129.
To reactivate the system
Press the button again; the indicator
lamp goes out.
The laws of physics cannot be re-
pealed, even with ASC+T/DSC.
Any consequences arising from traction
loss due to excessive vehicle speed re-
main the responsibility of the driver. For
this reason, do not take risks, using the
additional safety margin provided by the
system as an excuse.<
For additional details concerning
ASC+T/DSC, please refer to the chap-
ter describing "Advanced technology"
on page 185.