Advertisement
ASSEMBLY
1. Slide flex hose clip into the opening on the front
2. Snap the hose grip bracket into the back of
3. Attach cord wrap by snapping it into place
QUICK PREP STEPS
1. Unwrap hose and select desired tool.
2. Remove tank from tool side of unit. Pull on the
3. Your tank is marked for a large stain or a small
4. Replace rubber stopper, then replace the tank
5. Twist the quick release cord wrap to release the
GUIDELINES TO SPOT CLEAN
1. Hold the tool 1 inch above soiled surface and spray
2. Gently scrub the area with brush on tool.
3. Apply downward pressure to the tool and pull it
CLEANING FORMULA
›› Always use genuine BISSELL portable deep cleaning
For information about repairs or replacement
parts, or questions about your warranty, call:
BISSELL Consumer Care
Monday – Friday 8 am - 10 pm ET
Saturday 9 am - 8 pm ET
Sunday 10 am - 7 pm ET
Or visit the BISSELL website
All manuals and user guides at all-guides.com
of the machine until you hear a "snap."
machine on the clean tank side. Wrap flex hose
around unit and snap hose grip into bracket.
on the dirty water tank side of the machine.
Wrap power cord around cord wrap.
Tool easily snaps onto hose.
black tab to remove rubber stopper and reveal
tank opening.
stain. Based on your cleaning need, fill with hot
tap water to the water fill line. Add OXYgen
Boost to the OXYgen Boost fill line. Add BISSELL
2X formula to the formula fill line.
on the machine.
cord, plug in, and you're ready to spot clean!
trigger to apply cleaning formula.
toward you to suction up the dirt and cleaning
formula. Continue until no more dirt can be removed.
formulas. Non-BISSELL cleaning solutions may harm
the machine and will void the warranty.
BISSELL 2X Portable Machine Spot & Stain Formula
and OxyGen Boost Formula
1-800-237-7691
www.bissell.com
©2012 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 160-0585
Rev 10/12
Advertisement
