00 INDEX AND FOREWORD
Introduction of parts for the removal of taper pipe thread type joint
Nominal
Nominal No.
thread size
1
01
R
1
02
R
3
03
R
1
04
R
3
06
R
10
R1
12
R1
14
R1
20
R2
Precautions for installation and assembling work
•
Tighten the bolts and nuts (sleeve nuts) to the specified torque (KES) unless otherwise specified.
•
Install the hoses without twist and interference. If there is any in-between clamp, securely fasten it.
•
Replace all of the gaskets, O-rings, cotter pins, and lock plates with new ones.
•
Bend the cotter pins and lock plates securely.
•
When applying adhesive, clean and degrease the surface to apply, and apply 2 to 3 drops of adhesive to
the threaded portion.
•
When applying liquid gasket, clean and degrease the surface, and apply it uniformly after making sure that
the surface is free from dust or damage.
•
Clean all of the parts. If there is any damage, dents, burrs, or rust found on them, repair it.
•
Apply engine oil to the rotating parts and sliding surface.
•
Apply molybdenum disulfide lubricant (LM-P) to the surfaces of the press-fitting parts.
•
After installing the snap ring, check that the snap ring is settled in the ring groove completely.
•
When connecting wiring harness connectors, clean the connectors to remove oil, dust, or water, then con-
nect them securely.
•
Use the eye bolts without fatigue and deformation and screw them in securely. Match the directions of the
eyes and the hook.
•
When installing split flanges, tighten the bolts uniformly and alternately to prevent uneven tightening.
•
As a rule, apply liquid gasket (LG-5) or liquid sealant (LS-2) to the threaded portion of each taper male
screws which receive pressure.
PC290LL-11
PRECAUTIONS FOR DISCONNECTION AND CONNECTION OF PIP-
Square head type (A)
/
07042-00108
8
/
07042-00211
4
07042-00312
/
8
/
07042-00415
2
/
07042-00617
4
07042-01019
1
/
07042-01222
4
1
/
07042-01422
2
07042-02026
Plug (1)
Hexagonal socket head (B)
07043-00108
07043-00211
07043-00312
07043-00415
07043-00617
07043-01019
07043-01222
07043-01422
07043-02026
INGS
00-47