Samsung PS51D6900DS Service Manual page 42

•
Method of Color Calibration (HDMI)
1) Apply the 720p Lattice (N0. 6) pattern signal to the HDMI1/DVI IN port.
2) Press the Source key to switch to "HDMI1" mode.
3) Enter Service mode.
4) Select the "ADC" menu.
5) Select the "HDMI Calibration" menu.
6) In "HDMI Calibration Off" status, press the " " key to perform Calibration.
7) When Calibration is complete, it returns to the high-level menu.
8) You can see the change of the "HDMI Calibration" status from Failure to Success.
■ White Balance - Adjustment
Factory
ADC / WB - White Balance
Copyright© 1995-2011 SAMSUNG. All rights reserved.
(Low light) (High light)
Sub Bright Sub Contrast
R offset R gain
G offset G gain
B offset B gain
4. Troubleshooting
4-23