Advertisement
3.2.
APPLYING TENSION
F
WARNING! DO NOT overload. Note the pulling capacity in Section 2 Specification.
3.2.1. Engage the drive pawl(s) in the ratchet wheel(s) by pushing pawl spring(HP1000), or drive pawl spring lever (HP1300 & HP1500), in the
direction of arrow B.
3.2.2. Each pull of the handle will wind in the cable and pull the load.
3.3.
RELEASING THE TENSION
F
WARNING! Avoid abrupt handle movements, apply pressure to handle evenly and steadily.
3.3.1. Depress the drive pawl spring (HP1000), or drive pawl spring lever (HP1300 & HP1500), in the direction of arrow A.
3.3.2. Very carefully and slowly push handle in direction E until drive pawl pushes and disengages the stop pawl to clear the ratchet teeth.
Moving the handle back will release the load by one notch.
3.3.3. Repeat this handle motion as required to release the tension one notch at a time.
3.3.4. When the tension has been fully released, check that the load is stable and safe before removing the puller.
fig. 1
4.
MAINTENANCE
4.1.
CLEANING. Clean the puller after each use and wipe with a slightly oiled cloth. Store in a safe, dry, childproof location.
5.
DECLARATION OF CONFORMITY
HAND POWER PULLERS
HP1000, HP1300, HP1500
Models
98/37/EC Machinery Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Declaration of Conformity
are in conformity with the following standards and directives.
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
We, the sole importer into the UK, declare that the products listed here
The construction files for these products are held by the Manufacturer and may be inspected, by a national
authority, upon request to Jack Sealey Ltd.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
01284 757500
21st December 2001
01284 703534
E-mail: sales@sealey.co.uk
HP1000/1300/1500 - 1 - 191201
Advertisement
