HeimVision HMD2 User Manual page 6

Connecting the Camera to the HeimLife App
IMPORTANT:
Make sure the power of your camera is enough. You could use a 5V output power
•
adapter (not included) to charge it.
The camera can only support a 2.4GHz Wifi.
•
Avoid using special characters or symbols in your Wifi name and password, such
•
as @~!#$%^&* and so on.
Ensure the camera and your mobile device are close to the router when
•
connecting.
Press and hold the Power Button for 5 seconds to power on the camera, the LED
•
Indicator will be solid red during the startup process. Then it will change to flash
red slowly, which indicates the camera is ready to connect to Wifi.
Insert the Reset Pin into the Reset hole and press for 5 second to reset the
•
camera if the connection failed or you need to connect the camera with another
HeimLife account.
There is a beeping sound from the camera after a successful reset.
The explanations of LED Indicator:
•
LED Status
Flash Red Slowly
Flash Red Quickly
Solid Blue
Solid Red
Connecting by Scanning the QR Code
Step 1:
Log in to HeimLife App, tap
Camera Status
Ready for Wifi Connection
Connecting to Wifi
Wifi connected
Network abnormal
and Battery Camera.
6