Advertisement
Thank you for purchasing a Freedom Series™ Folding Ramp from National Ramp!
Please read the following instructions completely before use.
F
1. While folded, place the ramp down where it is to be used, making sure that the top and
bottom transition plates are flat on the upper and lower surfaces.
2. Open the ramp and verify the placement.
E
D
C
B
3. Confirm that the transition plates are both level and the ramp feels secure.
4. Affix the ramp to the top landing surface.
5. The ramp is now ready for use! When finished, gently fold until closed. The friction fit will
keep the ramp closed. Use the handle to help carry the ramp to its storage location.
A
ASED ON FIELD CONDITIONS AND ACTUAL INSTALL
www.NationalRamp.com • 877 884 7267
FREEDOM SERIES™
1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL
INSTRUCTIONS AND WARNINGS
OF NATIONAL RAMP.
FOLDING RAMP
1
F
E
D
C
B
A
1
REVISION: 03/21
OF NATIONAL RAMP.
Advertisement
Table of Contents
Related Manuals for National ramp FREEDOM Series
Summary of Contents for National ramp FREEDOM Series
- Page 1 FOLDING RAMP INSTRUCTIONS AND WARNINGS Thank you for purchasing a Freedom Series™ Folding Ramp from National Ramp! Please read the following instructions completely before use. 1. While folded, place the ramp down where it is to be used, making sure that the top and bottom transition plates are flat on the upper and lower surfaces.
- Page 2 While your mobility device may be rated for a higher slope, caution should be used for any slopes above 4.8° (1:12). See below chart. If your slope is greater than this please reach out to National Ramp for a modular ramp. R A M P L E N G T H 2’...
Need help?
Do you have a question about the FREEDOM Series and is the answer not in the manual?
Questions and answers