Download Print this page
Xiaomi MHCWBT1P-IB User Manual

Xiaomi MHCWBT1P-IB User Manual

Wifi bluetooth module

Advertisement

Quick Links

The user manual of WIFI、Bluetooth module
1.
The product description
2.
Basic parameters
RF output power
In the factory,the model approve code is lasered on the shielding case.
3.
The display method of Model approved code
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
4.
FCC Statement
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with the instructions may cause harmful interference to radio communications. However there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
The user can achieve wireless connection to WIFI net and Bluetooth, through this module 
Model
Feature Description
Product Name
Major Chipset
WLAN Standard
BT Standard
WLAN Frequency Range
BT Frequency Range
Spread Spectrum
Modulation Method
Data Transfer Rate
Antenna Reference
Interface
Supply Voltage
Dimension
Operating Temperature
Storage Temperature
BT
WLAN
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
MHCWBT1P‐IB
Feature Description
2.4GHz WIFI+Bluetooth dual‐mode module
RTL8723DS
IEEE 802.11b/g/n
BT2.1/4.2;v4.2 BR/EDR,v4.0 BLE
2.4GHz~2.4835GHz
2402MHz~2480MHz
IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum)
IEEE802.11g/n: OFDM (Orthogonal Frequency Division Multiplexing)
DBPSK/DQPSK/CCK(DSSS);BPSK/QPSK/16QAM/64QAM(OFDM)
11b:1,2,5.5, 11Mbps
11g: 6,9,12,18,24,36,48,54Mbps
11n:HT20MCS0~HT20MCS7
HT40MCS0~HT40MCS7
MHCWBT1P‐IB:WIFI/BT external ANT
SDIO1.1/2.0,HS‐UART
3.3V±0.3V
18(mm)*20(mm)*2.5(mm)
0°C to 70°C
‐40°C to 125°C
Band
2402MHz‐2480MHz
2412MHz‐2472MHz
Limited Power(dBm)
0‐20
<20

Advertisement

loading

Summary of Contents for Xiaomi MHCWBT1P-IB

  • Page 1 The user manual of WIFI、Bluetooth module The product description The user can achieve wireless connection to WIFI net and Bluetooth, through this module  Basic parameters Model MHCWBT1P‐IB Feature Description Feature Description Product Name 2.4GHz WIFI+Bluetooth dual‐mode module Major Chipset RTL8723DS WLAN Standard IEEE 802.11b/g/n BT Standard BT2.1/4.2;v4.2 BR/EDR,v4.0 BLE WLAN Frequency Range 2.4GHz~2.4835GHz BT Frequency Range 2402MHz~2480MHz IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum) Spread Spectrum IEEE802.11g/n: OFDM (Orthogonal Frequency Division Multiplexing) Modulation Method DBPSK/DQPSK/CCK(DSSS);BPSK/QPSK/16QAM/64QAM(OFDM) Data Transfer Rate 11b:1,2,5.5, 11Mbps 11g: 6,9,12,18,24,36,48,54Mbps 11n:HT20MCS0~HT20MCS7 HT40MCS0~HT40MCS7 Antenna Reference MHCWBT1P‐IB:WIFI/BT external ANT Interface SDIO1.1/2.0,HS‐UART Supply Voltage 3.3V±0.3V Dimension 18(mm)*20(mm)*2.5(mm) 0°C to 70°C Operating Temperature ‐40°C to 125°C Storage Temperature...
  • Page 2 Consult the dealer or an experienced radio/TV technician for help.  When the external temperature is lower than 0℃, the IC may be damaged to a certain extent, which will affect the operation of the module. Low Temperature Operation Please ensure that the operation temperature meets the requirements. FCC ID: 2AFZZ‐MHCWBT1P‐IB Radiation Exposure Statement...
  • Page 3: Radiation Exposure Statement

    Transmitter module FCC ID: ******* To satisfy IESD exterior labeling requirements, the following text must be placed on the exterior of the end product " Contains Transmitter module IC: * ****** Manufacturer: Xiaomi Communications Co.,Ltd. Address: #019,9 Floor, Building 6, 33 Xi’erqi Middle Road, Haidian District,Beijing, 100085 China A voltage stabilizing element or circuit is required on the power supplies to the module, and then the power...
  • Page 4 This equipment may be operated in all European countries.