Advertisement
Quick Links
USER
MANUAL
Universal
Shelter
For all Davis weather consoles including Vantage Pro2 ,
Vantage Pro2 Plus , Vantage Vue , Weather Envoy
and EnviroMonitor IP Gateway
Product Number 6618
Davis Instruments, 3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A. • 510-732-9229 • www.davisinstruments.com
™
R
R
R
™
Advertisement
Summary of Contents for DAVIS Universal Shelter
- Page 1 ™ For all Davis weather consoles including Vantage Pro2 , ™ Vantage Pro2 Plus , Vantage Vue , Weather Envoy and EnviroMonitor IP Gateway Product Number 6618 Davis Instruments, 3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A. • 510-732-9229 • www.davisinstruments.com...
-
Page 3: Contents Of Package
Welcome to Universal Shelter (product no. 6618) The Universal Shelter allows you to shelter your Vantage Pro2 or Vantage Vue console, EnviroMonitor IP Gateway, or Weather Envoy for remote or field installations. It has been carefully designed to allow for the mounting of all Davis weather station consoles and Envoys, and can be used with Solar Power Kits. - Page 4 Note: You may mount the shelter before installing the device. However, it may be easier to do this at a workbench rather than in the field. The shelter has been designed to fit Davis consoles. Inside the shelter, outlines of the Vantage Pro2 console, Vantage Vue console, and Envoy will indicate where they will be mounted in the shelter.
- Page 5 Heavy Duty Solar Power Kit (#6612). However, there is not enough room in the kit’s shelter for both the large battery and the console. You will need to mount your console in a Universal Shelter and connect it to the Heavy Duty Solar Power Kit.
- Page 6 2. Remove the plug from one of the holes in the floor of the Universal Shelter. Wrap the split oval grommet around the console power cable and feed it up through the hole. Insert the grommet snugly into the hole.
- Page 7 1. While holding the shelter against the pole, place a U-bolt around the pole and through the two holes at the top of the shelter. 2. Place a backing plate, a washer, and a hex nut on each of the bolt ends. 3.
-
Page 8: Contacting Davis Technical Support
Davis Instruments Corp., Hayward, CA. © Davis Instruments Corp. 2021. All rights reserved. Information in this document subject to change without notice. Davis Instruments Quality Management System is ISO 9001 certified. 3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A.