Advertisement
Combining Safety Commander™ with a tablet solves common problems
on the work floor
Can the need for dedicated terminal
development be eliminated?
BEFORE
Creating dedicated terminal
devices in house can be costly,
including the development costs.
Keeping up with changing needs
as features are removed or
upgraded is also a burden.
AFTER
Combining Safety Commander™ with a tablet results in a low-cost
dedicated control terminal. Hardware development is unnecessary,
and discontinuations or upgrades can be handled readily at the
software level. Safety and security are also maintained.
Can the number of different touch panels on
panel boards be reduced?
BEFORE
Individual touch panels are installed on multiple panel boards, but
this is inefficient as the panels are used infrequently.
AFTER
Using one detachable Safety Commander™ and tablet, operations
can be performed in multiple workplaces. It is no longer necessary
to install permanent touch panels in each workplace. Safety is also
improved, since the safety features are right at hand.
4
ERMEC, S.L. BARCELONA
ERMEC, S.L. BARCELONA
Tel. +34 902 450 160
Tel. +34 902 450 160
C/ Francesc Teixidó, 22
C/ Francesc Teixidó, 22
info@ermec.com
info@ermec.com
08918 Badalona
08918 Badalona
SPAIN
SPAIN
www.ermec.com
www.ermec.com
Is there a way to improve touch panel
functions?
BEFORE
A dedicated touch panel is used
for equipment control. We would
like to increase the functions but
also want to keep costs down.
AFTER
Combining Safety Commander™ with a tablet enabled use for
process control, viewing of drawings, and operation log checking.
Along with safety assurance on-site work efficiency is improved.
Costs have also been kept low.
Can an existing tablet be used for equipment
control?
BEFORE
We already have a tablet for process control and would like to use it
also for controlling equipment, but are concerned about safety.
AFTER
By simply attaching safety features onto the tablet, we were able to
use it for equipment control. We also saved equipment costs.
ERMEC, S.L. - MADRID
ERMEC, S.L. - MADRID
bilbao@ermec.com
bilbao@ermec.com
C/ Puerto Rico, 4
C/ Puerto Rico, 4
portugal@ermec.com
portugal@ermec.com
28222 Majadahonda (Madrid) SPAIN
28222 Majadahonda (Madrid) SPAIN
+
?
+
Advertisement
