Polygroup SUMMER WAVES 3D GOGGLE Instructions page 2

• Correct adjustment can be obtained by tensioning the band until a comfortable fit is achieved.
• Correct adjustment of the bridge strap is essential for both comfort and a watertight seal.
• To avoid water intake, slide the lenses closer together or further apart one notch at a time until the correct fit is obtained.
• To clear water or to adjust goggles, take a firm grip on the eye cup and tilt the lower edge of the eye cup slightly away from the face.
• To remove goggles, put thumbs under head strap at side of head. Slide thumbs to back of head, and lift elastic from back to
front of head.
• It is recommended that teachers, coaches, or mature swimmers demonstrate this method to young children.
3. Wear the goggles to see 3D effect inside the pool.
1 2 3
Care Instructions:
1. Pool can be cleaned with mild soap and lukewarm water only.
2. Rinse goggles with cold tap water before storage.
3. Air-dry goggles, and store in dry place. Do not store in direct sunlight.
4. Do not store pool in temperatures below 32º F or above 125º F.
5. Use a small patch kit to repair punctures or holes in pool.
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
MST. Extended operating days and hours during peak season requirements.