Advertisement
Quick Links
GATEWAY™ WALL MOUNTED TABLE
INSTALLATION GUIDE
HARDWARE:
JOINER BOLT
JOINER BOLT
1/4"-20 x 9/16"
1/4"-20 x 7/8"
Customer Support: 1.800.668.9318
Email: mail@nienkamper.com
Web: www.nienkamper.com
REVIEW ENTIRE DOCUMENT PRIOR TO ASSEMBLY
WALL MOUNT BRACKET
22 1/2" X 2 1/2"
THIS IS A GENERAL ASSEMBLY GUIDE, NOT ALL CONDITION MAY APPLY TO YOUR PARTICULAR INSTALLATION
SUGGESTED MINIMUM CREW:
APPROXIMATE INSTALL TIME:
WOOD SCREW
1/4"-20 x 5/8"
2
1 hr
MOUNTING PLATE
1/4" x 3" x 4"
14.09.17
Advertisement
Summary of Contents for Nienkamper GATEWAY
- Page 1 GATEWAY™ WALL MOUNTED TABLE SUGGESTED MINIMUM CREW: APPROXIMATE INSTALL TIME: 1 hr INSTALLATION GUIDE REVIEW ENTIRE DOCUMENT PRIOR TO ASSEMBLY HARDWARE: JOINER BOLT JOINER BOLT WALL MOUNT BRACKET WOOD SCREW MOUNTING PLATE 1/4”-20 x 9/16” 1/4”-20 x 7/8” 22 1/2” X 2 1/2”...
- Page 2 GATEWAY™ WALL MOUNTED TABLES INSTALLATION GUIDE Option A) Option B) Place rails upside down on the ground. Place rails upside down on the ground. 27 3/4” (for 29”h table) The T-nuts in the rail should be facing The T-nuts in the rail should be facing 36 3/4”...
- Page 3 To install, position closely to Forum plug into Switcher Box. and screw in place with #6 x 5/8” wood screws (qty4). Customer Support: 1.800.668.9318 Email: mail@nienkamper.com Web: www.nienkamper.com THIS IS A GENERAL ASSEMBLY GUIDE, NOT ALL CONDITION MAY APPLY TO YOUR PARTICULAR INSTALLATION...