CVG1 OPERATOR’S MANUAL Table of Contents Overview ............................5 Safety Precautions ..........................6 Safety Alerts............................. 6 General Safety ..........................7 Battery and Electrical Safety ......................7 Fuel Safety ............................8 Engine Safety ........................... 8 Belt Safety ............................9 Transporting Safety .......................... 9 Lifting Safety9 Operating ............................
Page 4
Welcome to the Diamond Products family and thank you for choosing Diamond Products equipment. At Diamond Products we are driven to ensure you are completely satisfied with your product and continually strive to improve our product line so that we can offer you the best possible equipment in the industry.
4443. Refer to the Diamond Products Parts List for additional information and part diagrams. Refer Respiratory Hazards to the engine manual and manufacturer as the...
CVG1 OPERATOR’S MANUAL General Safety • Read and understand all safety, operations, and maintenance instructions provided in this manual prior to operating or • Operate or service the equipment with any servicing the saw. clothing, hair, or accessories that can snag •...
CVG1 OPERATOR’S MANUAL • Engine Safety Use protective eyewear or a face shield, and avoid contact with the skin when • Refer to the engine manual as the primary handling/servicing the battery. source for engine safety. • Use a proper battery tester when testing •...
CVG1 OPERATOR’S MANUAL Belt Safety Transporting Safety • • Turn off the engine and let the belts cool Remove the blade prior to transporting the down prior to servicing them. equipment. • • Regularly inspect the belts for fraying, Make sure the truck/trailer is in good,...
CVG1 OPERATOR’S MANUAL Stopping the Engine Operating In an emergency, simply turn the ignition Starting Engine switch to the off position, otherwise follow the 1. Remove at least one cap from the instructions below intake before starting engine. 1. Move the throttle to the MIN position.
2. Raise the handle so the knobs on the handle are horizontal. 3. Roll the drum out from underneath the vacuum. CVG1 with Lid removed 4. Remove the 6 inner nuts, the filter can now be removed from the assembly.
Open the throttle all the way to the Engine full throttle? Battery Dead? Replace battery or put on a charger 3. Shake Bar will not turn on Shake Bar fuse blown Replace fuse Contact Diamond Products Technical Service at 1-800-321-5336...
CVG1 OPERATOR’S MANUAL Appendix B Serial Number Record the CVG1’s serial number below for future reference and customer service purposes. The serial number is located below the battery box. Serial Number...
Page 16
(1) year from the date of shipment to Customer. The responsibility of Diamond Products under this Warranty is limited to replacement or repair of defective parts at Diamond Products’ Elyria, Ohio...