A. & H. Meyer NET+ Instagrid 230 V-PowerPack Quick Manual

NET+ Instagrid 230 V-PowerPack
QUICK GUIDE
1. SYSTEM OVERVIEW
2. TECHNICAL SPECIFICATIONS
Parameter
Output voltage
Nominal power
Capacity
Charging time
Charge input voltage
Charging capacity
On (idle)
Storage
Operating temperature
Weight
Dimensions
Degree of protection (IP)
Noise
150% boost (>300s)
200% boost (>120s)
250% boost (>30s)
Peak performance
Output circuit breaker
max. short-circuit current
IEC - degree of protection
Socket
Second socket
Charging input
3. GENERAL INFORMATION
The NET+ Instagrid 230 V-PowerPack is a mobile energy storage and intended to power electrical
consumers. The portable power system contains lithium-ion batteries with an energy content of
less than 100 Wh each. Cells in lithium-ion batteries are gas-tight and non-hazardous, provided
the manufacturer's instructions are followed during use and handling. The user is liable for
damage stemming from improper use. For more information, see the user manual (included with
the battery pack).
Value
230 V / 50 Hz
3.600 W (16 A)
2.074 Wh
Less than 3 h (up to 100 %) /
1.5 h (up to 50 %)
100 – 250 V / 45 – 65 Hz
1.000 W (4 A)
150 h
> 3 years
- 20 °C to 45 °C
19.8 kg
420 x 210 x 420 mm
IP54+
< 10 dB
5.400 W (24 A)
7.200 W (32 A)
9.000 W (40 A)
18.000 W (80 A)
16 A
160 A
Class II / double insulated
CEE 7/3 Socket (16 A)
Neutrik powerCON TRUE1
Neutrik powerCON TRUE1
v.1.0
1. Carry handle
2. Front end cap
3. Rotary switch
4. CEE 7/X output
5. LED indicator
6. Rear end cap
7. Frame
8. AC charging input
9. NAC 3PX - TOP output
10. Housing
Comment
European standard for power
quality
RMS
230V output active, without load
p
Switch in or osition
No charging below 0 °C
Including the frame
Including the frame
Water- and dust-proof
Noiseless, passive cooling
RMS
RMS
RMS
RMS
E-Fuse with C characteristic
To IEC 61140
Includes the charging cable
1