Page 1
Your grace, meet Ace. TUSHY Ace Owner's Manual...
Page 2
You’ve earned the right to be called Your Hiney-ness. Prepare Your Toilet Troubleshooting This manual will guide you step by step through your TUSHY Ace installation. Get ready for a sparkly butt, a smaller footprint Connecting Your Warranty TUSHY Ace and a toilet that truly feels like a throne.
Make sure you check for leaks after installing your TUSHY Ace and periodically thereafter. Do not attempt to open or perform internal maintenance on the TUSHY Ace as this could result in injury or death as the device has electrical components. Get into the groove Let’s get this POTTY STARTED! Turn on some rump-shakin’...
Screwdriver (For any spills) Access to Power Outlet Within 3’ TUSHY Ace Remote Mounting Dock 3x AAA Tank Adapter Flexible TUSHY Ace Hose Batteries (7/8” Compression) (1/2” Compression) 3’ Base Plate 2x Mounting Brackets 2x Mounting Bolts 2x Bolt Washers...
Page 5
If you’ve got the Standard, you'll be good to go in no time! Make sure your TUSHY Ace matches your toilet’s bowl shape. If they don’t match or if you are unsure, reach out to If you have any questions at all, email aceinstall@hellotushy.com...
Page 6
;) with the valve adapter. We’ll get you set up in no time. You can connect your TUSHY to your sink’s water supply. If you want to start a Flushometer installation, visit our Flushometer page hellotushy.com/aceflushometer for an instruction video and a parts kit you will need.
Page 7
The French Curve 3. Check your water connection MAYBE Flexible Rigid hose pipe What kind of water connection does your toilet have? If you have a flexible hose (left), you’re good to go. If you have a hard pipe, contact our Poo-rus and we will send you a flexible pipe to replace it.
Page 8
STEP 1: Turn off your water supply valve due to potential shock hazard. Before getting started, your TUSHY Ace must have access to a GFCI power outlet to ensure safe Turn off the water valve beside the toilet by turning it clockwise.
Page 9
STEP 3: Remove the toilet seat TUSHY TIP TUSHY Tips For most toilet seats, flip up the screw caps behind the seat with a You may need to hold the nut on the underside of the screw with your flathead screwdriver to access the screws. Turn counter-clockwise other hand (using pliers or a towel if necessary) while unscrewing.
Page 10
Got a hard metal pipe instead of a flexible hose connected to your toilet? No problem! You can swap that hard metal pipe out and replace it with the Flexible TUSHY Ace Hose included in your TUSHY Ace spare parts kit!
Page 11
STEP 5: Attach your TUSHY Ace Base Plate to c. Line up the included mounting brackets on the Base Plate directly the bowl over the toilet bolt holes. The mounting brackets should click into the grooves in the Base Plate to stay in place.
Page 12
Attach your TUSHY Ace to the Base Plate Check your Ace alignment Next, place your TUSHY Ace onto your bowl in front of the Base Plate. You will notice that on the bottom of the main body there are two slots that will slide onto the Base Plate.
Page 13
TUSHY TIP To remove TUSHY Ace from the Mounting Plate, press the unlock button on the right side of the seat and pull the seat away from the tank. Then, loosen the Mounting Bolts and adjust the Base Plate until it is in the desired location before reattaching your TUSHY Ace.
Once the connections are leak-free and the area around you is the Tank Adapter and screw it onto the inlet port of the bidet in a dry, plug your Ace into a grounded, 3-prong 120V outlet. Is your butt counter-clockwise direction if you’re looking from above. Do not tingling yet!? overtighten—finger tight should be perfect.
Page 15
To attach the remote to the dock, simply line it up and press the re- mote against the dock. The embedded magnets will hold it in place. TUSHY TIP Can't decide on a mounting location? Set the dock aside and leave the remote on the toilet tank when not in use.
To operate your TUSHY Ace with the remote, tap the setting button How To Use Your TUSHY Ace you want to change (nozzle angle, pressure, or temperature), then use the increase or decrease buttons to adjust that setting. Next, press Bum or Front wash to activate the spray.
Lost remote, dead batteries? Check your couch cushions! If you Warnings & Safety still can’t find it, TUSHY Ace has a simple spray function that can be accessed on the side of the bidet. To operate the Bum or Front wash, press the corresponding button once to activate, and again to stop.
Page 18
• Do not handle the power plug forcefully or place heavy objects on the power plug. WARNING: Do not stand on the TUSHY Ace. Doing so could result in • Remove any dust or water from the power plug before plugging in.
Storing or moving your TUSHY Ace Possible Causes: Possible Solutions: buttons don’t To uninstall your TUSHY Ace, turn off your water valve, disconnect the 1. TUSHY Ace not 1. Make sure the seem to work. plug from power, disconnect your Flexible TUSHY Ace Hose, dis- plugged in.
Flushometer page this warranty. at hellotushy.com/ aceflushometer for an 4. TUSHY is not responsible for the cost of return shipping of this instruction video and a product. parts kit you will need. 2. You have a skirted 2.
Page 21
PURCHASER. TUSHY SHALL NOT BE RESPONSIBLE FOR LOSS OF Meet the TUSHY Poo-rus USE OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE PURCHASER OR A THIRD PARTY, OR FOR ANY OTHER EXPENSES NOT SPECIFICALLY STATED ABOVE.
Need help?
Do you have a question about the Ace and is the answer not in the manual?
Questions and answers