Canon S 530D User Manual page 66

Eject the Memory Card.
When you select this item, the indicator lamp starts blinking, a message is
displayed, and the printer gets ready for memory card ejection. When the
indicator lamp goes off, press the Eject button to eject the memory card.
Note
If you are using Windows XP or Windows 2000, the computer recognises
the card slot as a removable disk. Therefore, if you want to turn off the
printer while you are using the computer, perform the hardware removal
operation by using the "
Change the drive's read/write attribute.
When you select this item, the USB Memory Card Settings dialog box is
displayed. You can change the mode (read-only mode, and read/write enabled
mode) of the card slot by following the instructions displayed on the screen. Be
sure to eject the memory card using Eject the Memory Card. before you
change the mode.
Auto-start an application when a card is inserted./Do nothing when a card
is inserted.
Select whether an application is to be started automatically when the memory
card is inserted.
Note
The application to be started can be set in advance with the Auto-Start
Properties function.
" icon found on the right side of the task bar.
Setting the Application to Be Started
Using the Memory Card Startup Utility (Windows)
Starting the Memory Card Startup Utility 66