Page 1
R301 Card Reader SER’S ANUAL Made by: Feitian Technologies Mar, 2016...
Page 2
Revision Sheet Date Revision Description Dec. 2014 V1.0 First release Feb. 2016 V1.1 Second release April 1, 2016 V1.2 Add B6 casing May 31, 2016 V1.3 Modify card frequency Sep 2, 2016 V1.4 Update contents Dec 22, 2016 V1.5 Add UID and Update tool function into user manual Jan 12, 2016 V1.6 Add get serial number chapter...
Page 3
Product to you. Breach of Warranty – In the event of breach of this warranty, Feitian’s sole obligation is to replace or repair, at the discretion of Feitian, any Product free of charge. Any replaced Product becomes the property of Feitian.
Page 4
Termination – This Agreement shall terminate if you fail to comply with the terms herein. Items 2, 3, 4 and 5 shall survive any termination of this Agreement.
GENERAL INFORMATION Product Introduction R301 reader is a kind of high-speed contact smart card reader, which is used for PC environment or relevant smart card environment. It is compliant with standard CCID specification and USB 2.0 interface (also the USB 1.1 interface). The R301 reader can operate all CLASS A, CLASS B and CLASS C smart cards which are compliant with ISO 7816-1/2/3.
Applications R301 reader is a kind of high-speed contact smart card reader, which is used for PC environment or relevant smart card environment. It is compliant with standard CCID specification and USB 2.0 interface. The R301 reader can operate all Class A, Class B and Class C smart cards which are compliant with ISO 7816-1/2/3.
SPECIFICATION Overview General Parameters: Work frequency(Hz): 4-12M Contact card support: Support ISO 7816 standard, T0, T1, CLASSB, CLASSC, CLASSBC Communication interface: Communication for PC: USB 1.1/2.0/3.0 full speed(12Mbps) Power supply mode: USB DC 5V ...
Technical Parameter Table Technical Specification Product R301 Name Casing Number Host USB 2.0 CCID(also compliant with USB 1.1) Interface Transmission 12Mbps(USB 2.0 Full Speed) Speed Smart Card Clock 4MHz-12MHz Basic Frequency Parameter Power to 60mA Smart Card Supported Card Types: 1.8V, 3V and 5V...
Page 12
Storage ~20°C ~ 85°C Temperature Humidity ≤90%(non-condensed) ISO-7816 Class A, B, C ( 5V, 3V,1.8V) Standard EMV Level 1 Standard Card Reader PC/SC Standard Standard Standard USB 2.0 Standard CCID Standard API Standard PC/SC Lite/WINSCARD API Plug and Play Readily Compliant Suits Any Application Features Open UID(user ID) function...
Product photo R301 reader is a kind of high-speed contact smart card reader, which is used for PC environment or relevant smart card environment. Product shell is using C25 by default. Also customer can choose other casing, like C11 and C41, for SIM SIZE card, we have B5 and B6 casing.
Page 15
B6 with SIM Card slot only: C41 with full size card slot only:...
Hardware Operating Environment R301 Card Reader providing user with USB, it helps to make connection between PC, Android device or other equipment more convenient. The card can be operated by local PC or Android device via R301 Card Reader. Software Environment R301 Card Reader has rich software environment.
R301 CARD READER FIRMWARE UPDATE TOOL Introduction of Update tool Firmware update tool using to upgrade R301 Card Reader firmware, it is for maintain in future. R301 Card Reader apply dual encrypted mechanism. The firmware will have encrypted by UID (User ID), only the right UID firmware can be update by right reader.
Step #2: After re-plug reader, open update tool application again and then starts updating. The whole progress will cost around 30s. please not remove reader while in updating. If something happens while in updating progress, please open tool and re-updating reader again. Errors and solutions 1.
Page 21
3. If it shows below error, please check your reader has connected to PC with USB port correctly (or check your reader hasn’t connect to VMware). The error means haven’t found your reader. 4. If you found below error, please check your reader firmware version, the tool only using for R301E2, which firmware is 5.4x.
UID, to keep their customer only can be using specified reader. The operation API include in R301 Card Reader SDK, also we provide windows tool for customer do operation on Windows. For mobile platform, also have such API for call (check developer guide).
The operation of UID tool We was publish two model of R301, R301M and R301E2, the R301M is old version, to check which model you are using, please follow below: Insert your reader and open device manager-> Hardware IDs, the 0440 is firmware version, the 04XX is Feitian R301M model.
Page 24
If your reader is R301M, The R301M doesn’t have read/write flash function, only had UID function, the UID tool please check path R301\R301M\UID Tool for R301M, the user manual can found in same folder, the file name call UID_Instructions.chm. If you want to read SN from R301M, then please using another tool which path is R301\R301M\ReadSN\BIN, follow below operation, click Serial Num button and get Serial number from reader.
The serial number is specific unique number for reader, the number includes production date. We provide API for PC and Mobile platform to read it out. On this part, we only show the tool that Feitian made. After you connected reader to PC, click “Get serialNo” button to get SN.
OEM ITEMS 1. Case Customization Feitian can provide AI file of the casing, and customer can based on our AI put their logo on casing or provide logo with AI file, Feitian help do it. Customization options: silk-printing 2. Packaging Customization...
A: The SDK based on PCSC API implement, we provide demo source code to reference and guidance customer how to call our APIs. Q: Why there is no “found new hardware” popup window when I attach a R301 reader? Symptom: After attached R301 reader, there is no “found new hardware” popup window.
APPENDIX ABBREVIATION CE Attestation of Conformity The equipment complies with the principal protection requirement of the EMC Directive (Directive 89/336/EEC relating to electromagnetic compatibility) based on a voluntary test. This attestation applies only to the particular sample of the product and its technical documentation provided for testing and certification.