Page 1
Blü-Test Wireless Test Instruments Operations Manual & User Guide Probe Clip Open tip for Hanger for measuring attaching to temperature room units and humidity and grilles Sealed piercing Sealed probe tip can be used in liquids Gauge Graph Multi-function button Adjustable rubber duct cone allows hands-free...
Installation & Operations 41521_BluTest_G2_ins rev. 08/16/21 Sect. 2: Probe Operation BAPI recommends that you fully charge the battery with the supplied USB cable prior to first use. Button Press Functionality One button press ..Turns unit on. Wakes the unit if it is in sleep mode.
08/16/21 Sect. 4: Dashboard Screen Overview - Blü-Test Application The Blu-Test App is used to manage our full suite of test instruments. Visit our website to see the other probes in the suite. Navigate to the Dashboard Screen by either tapping the Dashboard option from the Home Screen, or tapping the Dashboard icon on the bottom of all screens.
Blü-Test Wireless Test Instruments Installation & Operations 41521_BluTest_G2_ins rev. 08/16/21 Sect. 5: Graph Screen Overview - Blü-Test Application The Graph Screen (Fig 10) trends “Live Data” from up to 6 probes. The graphed data can also be saved as a log by tapping the “Save” button, and the log files will appear in the “unassigned logs”...
Screen before adding Screen with locations locations added to BAPI site IMPORTING SITES AND LOCATIONS To create a .csv file for import, simply create an Excel spreadsheet as shown in Fig 19. Save the Excel file as a .csv file, and email or save the .csv file to your smart device. Go to the Sites Screen on the Blü-Test App and tap the “Import”...
These include: Temperature Transmitter Accuracy Calculator This tool is used to determine the accuracy of a BAPI T1K 4 to 20 mA Platinum RTD transmitter for a given temperataure range. Just enter...
Page 8
These include: Temperature to Resistance This tool will calculate the resistance of a BAPI Thermistor or RTD sensor when you enter a temperature. The most common Thermistors and RTDs are included in the tool.
Blü-Test Wireless Test Instruments Installation & Operations 41521_BluTest_G2_ins rev. 08/16/21 Sect. 9: Best Measurement Practices • Room Sensor measurement is done by holding the Blü-Test probe directly under the sensor enclosure for 3 minutes or until the reading stabilizes. Body heat or breathing on the sensor is a major source of faulty readings, so holding the Blü-Test probe at the button end and standing away from the sensor is the best way to ensure a good measurement.
If grease infiltrates the probe, the unit may be damaged. Send it back for cleaning seams to BAPI for service. Note: The Piercing Temperature Probe is NSF certified and must be cleaned in a means that is acceptable to your local food inspector and/or regulatory compliance manager.
Blü-Test Wireless Test Instruments Installation & Operations 41521_BluTest_G2_ins rev. 08/16/21 Sect. 14: Specifications Power: 3.7V, 2,600 mAh Rechargeable Battery Charging: Standard USB Charger, 1.5A or greater, Micro-USB cable included Measurement Range: Temperature: -40 to 185°F (-40 to 85°C) %RH: 5 to 95% Non-condensing @ -40 to 158°F (-40 to 70°C) Differential Pressure Low Range: -1 to +1”...
Page 12
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA Tel: +1-608-735-4800 • Fax: +1-608-735-4804 E-mail: sales@bapihvac.com • Web: www.bapihvac.com Google Play and the Google Play logo are trademarks of Google LLC. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries and regions. App Store is a service mark of Apple Inc.