Spektrum Hangar 9 Fun Scale P-47 PNP Quick Start Manual

Basic Setup (6+ channel Receiver and Transmitter compatible)
The basic setup provided here gives Fun Scale P-47 PNP owners presets to help
expedite setup and to get you in the air quickly. This includes dual rates,
retractable gear operation and throttle cut. There are also switches and
channels assigned for use with optional SAFE and AS3X modes (when paired with
a Spektrum Smart AS3X receiver) and reverse thrust from the included Spektrum
Avian Smart ESC. This Smart Receiver model preset is meant to be used with
Spektrum 6-channel AS3X and SAFE Smart receivers, such as the Spektrum
AR637T, AR630 and AR631. Likewise, this file is setup for use with the available
transmitter preset. This file can be imported on to your receiver via the
Spektrum PC Programmer app. See links below for model preset import
instructions and to download the Model Preset files from the Spektrum File
Share directory.
- Download DX Gen2 Presets HERE – - Download NX Setups HERE – - Download iX Setups HERE –
6-Channel Basic Model Preset
Use the Fun Scale P-47 PNP model
file for simple setups with Flaps,
Dual Rates, Throttle Cut, and
optional- use SAFE and Thrust
Reverse features.
Once the model files are loaded, and your receiver is installed with the port assignments shown
above, it is VERY IMPORTANT to follow our Preflight Checklist. This verifies correct function and
LEAVE PROPELLER OFF UNTIL PREFLIGHT CHECKS ARE COMPLETED
Hangar 9 Fun Scale P-47 PNP Model Preset Notes and Instructions
SWITCH LAYOUT FOR TRANSMITTER MODEL PRESETS
Channel 5/Switch A (Retractable
Gear)
Pos 0: Gear Down
Pos 1: Gear Up
will prevent damage to components.
Receiver Port Assignments for 6-channel AS3X/SAFE
Download Smart SAFE/AS3X Receiver Setups HERE
Channel 8/Switch B (optional
Smart SAFE Receiver needed with 6
channel Smart SAFE receiver
preset)
Pos 0: SAFE – Angle Demand
Pos 1: AS3X Stability
Pos 2: Gyro off – no stability
Channel 7/Switch D Other Functions
(Thrust Reversing needs
configured via Avian Prog)
Pos 0: Normal Switch C: Elevator/Aileron
High and Low Dual Rates
Pos 1: Thrust Reverse
Switch H: Throttle Cut
Pos 2: Thrust Reverse
-