1. Manuals
  2. Brands
  3. MAKSIWA Manuals
  4. Tool Storage
  5. MA.1000
  6. Instruction manual

MAKSIWA MA.1000 Instruction Manual

1.000 mm
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

MA.1000
Workbench 1.000 mm
INSTRUCTION MANUAL
Attention: Read this manual before using the product
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MA.1000 and is the answer not in the manual?

Questions and answers

Summary of Contents for MAKSIWA MA.1000

  • Page 1 MA.1000 Workbench 1.000 mm INSTRUCTION MANUAL Attention: Read this manual before using the product...

  • Page 2: General Safety Rules

    • Make sure your power supply matches the designation on the plate. A 10% decrease in voltage or more will cause loss of power and overheating. All MAKSIWA equipment is tested at the factory. If this tool does not work, check the power supply.

  • Page 3: Functional Description

    • Do not overreach. Keep your balance and your feet in a comfortable position at all times. The MA.1000 Support Table is perfect for your workshop. It is is • Disconnect tools before servicing or changing accessories, such made of MDF with a work area of 1,000 x 420 mm.

  • Page 4: Installation & Assembly

    3) Fix the casters in the appropriate place using a No. 10 spanner. INSTALLATION / ASSEMBLY 1) For packaging reasons, the machine is not completely assembled. Remove the product and all components from the machine Fig.04 - Fix the casters 4) Lift the legs of the table, starting from the side on which the casters were fixed.
  • Page 5 Fig.11 - Wiring compartment Fig.08 - Spaces for fixing the legs Fig.12 - Outlets MA.1000 10) To close the table and transport it, start by loosening the Fig.09 - Standing Table handles on the side where the wheels are fixed.
  • Page 6 Repeat the process on both sides. Fig.18 - MA.1000 transport view Fig.15 - Adjustable legs Fig.16 - Adjustable handle Fig.19 - Transport MA .1000 12) Use the hand openings, lift and transport the MA.1000 with ease, using the wheels. Fig.17 - Hand opening...

  • Page 7: Maintenance

    All fixed parts of the machine are sealed. They are 10) MAKSIWA is not responsible for lost productivity, direct or permanently lubricated and require no maintenance. indirect damage, caused to the equipment owner or third parties, 2) Clean and remove all dust and wood chips from the or any other expense, including lost profits.

Table of Contents