LG SP9A Simple Manual page 2

HDMI IN
HDMI IN
OPTICAL
(ARC)
OUT
a a
(TV eARC/ARC)
HDMI OUT HDMI IN OPTICAL IN
b
C
HDMI OUT
Replacement of Battery
SP9A.DNGAFLK_SIMPLE (Sheet)_MFL71796926.indd 3-4
A
B
D
Installing and Using the Product
ENGLISH
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner' s Manual. Some of the content in this manual may differ from your product.
A Sound bar
B Remote Control Receiver / Status Display
a Connect the sound bar to your TV via an optical cable or an HDMI cable.
b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an HDMI cable.
c Connect to power in the following order: wireless subwoofer [ sound bar. Then, turn on the sound bar. When the connection is
automatically established with the sound bar, the LED on the wireless subwoofer will light up in green.
d Using the product with your TV
A Press the Function button repeatedly until "OPT/HDMI ARC" appears on the status display.
B On your TV' s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
C When the TV is properly connected to the product, "OPT", "ARC", or "E-ARC" will appear on the status display with a sound.
e Connecting the product to your smartphone via Wi-Fi
A Connect your smartphone to Wi-Fi.
B Install the LG Sound Bar app on Google Play or the App Store.
C Run the LG Sound Bar app and follow the instructions.
D The product will connect to your smartphone and you can control the product with LG Sound Bar app.
f Connecting the product to your smartphone via Bluetooth
A Tap the Settings button on your smartphone and select
On)
B Press the Bluetooth pair button. After a moment, you will see "BT READY" on the status display.
C Find and tap "LG_Speaker_SP9A_XXXX" or the name you registered on the Google Home app.
D When the product is connected to your smartphone via Bluetooth, you can see the status display change from "PAIRED" [
"Connected Bluetooth device name" [ "BT" .
If you see a red LED on the back of the wireless subwoofer, it means that the sound bar is not connected to the subwoofer. If this is the
case, connect them in the following order.
A Press the Power button on the sound bar to turn it off.
B Press the PAIRING button on the back of the disconnected wireless subwoofer. Check if LED blinks green.
- If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the back of the subwoofer again.
C Press the Power button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the back of the wireless subwoofer.
Keep the sound bar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
y Some speakers may not make sound depend on the input source. Select CINEMA sound mode to listen through all speakers.
y Design and specifications are subject to change without notice.
y Google Play is a trademark of Google LLC.
C Wireless Subwoofer - Install it close to the sound bar.
D External Device - (Blu-ray player, game console, etc.)
Bluetooth. Turn on the Bluetooth function. ( Off >
2021-07-27 1:47:08