Table of Contents
Advertisement
9
Slide the memory module into the memory module slot and push it in until it clicks into place.
!
Do not touch any other components on the motherboard.
Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open
slot. Do not force the memory module into the slot in a wrong orientation, as it may cause damage to the slot and the module.
10 Replace the memory module compartment cover and tighten the screw.
11 Connect the power cord and the peripheral devices to the back of the computer.
12 Replace the back panel cover.
See Removing and Replacing the Back Panel Cover
(page 22)
for the procedure.
n
125
Upgrading Your VAIO Computer
N
Advertisement
Table of Contents
