Related Manuals for Sefa PR 245 S
Summary of Contents for Sefa PR 245 S
- Page 1 ® SEFA France S.E.F.A Z.I PASTABRAC - B.P 44 11260 ESPERAZA FRANCE Tel :33 (0)4.68.74.05.89 - Fax :33.(0)4.68.74.24.08 E Mail : contact@sefa.fr V01/0605...
-
Page 2: Table Of Contents
® SEFA France SUMMARY CONDITIONS OF GUARANTEE .............................1 SPECIFICATIONS................................2 III. GENERAL POINTS ................................2 USE OF THE MACHINE ...............................5 SAFETY.....................................5 INSTALLATION................................7 DESCRIPTION OF THE RUNNING CYCLE ........................7 PRESS SETTINGS ................................8 TEMPERATURE / PRESSING TIME SETTINGS ......................8 TEMPERATURE SETTING ............................8 TIME SETTING................................8 PRESSURE ADJUSTMENT .............................8... -
Page 3: Specifications
® SEFA France For the pneumatic machines, any trace of detergent oil in the pneumatic circuit inhibits the conditions of guarantee previously mentioned. For any technical information or spare parts orders, please give the reference number of the machine as well as its serial number. - Page 4 ® SEFA France Micro switch : timer start Pneumatic Handle for distributor plate rotation Pressure adjustment wheel ( column height variation) Heating plate connector Security microswitch On – Off + Fuse Manometer Pressure indicator Filter Right & left thrust microswitch for...
- Page 5 ® SEFA France Option Security connector Silicone mousse Heating plate Removable inferior plate Emergency stop Reset button LCD display Timer + T° regulation Push buttons Tactile keyboard This heat seal press is standard to the article L 233-5 of the labour laws, to ensure the safety of the user.
-
Page 6: Use Of The Machine
HOT SURFACE ELECTROCUTION RISK DANGER, WARNING You will find most of these symbols on the SEFA machines. Some important points for the safety of the staff: Avoid touching the hot parts of the equipment while in use. Do not put your hands between the plates once the equipment is activated. - Page 7 They must be kept in place and in good condition during normal operation. The PR 245 S is equipped with security systems protecting the operator from any risk of pinching. The main elements of security are: The emergency stop Situated on the left on the front of the machine: if the operator actions it, he switches the machine off.
-
Page 8: Installation
® SEFA France 2. INSTALLATION USE BY QUALIFIED STAFF ONLY Do not manipulate the machine by the plates! Unpack the machine. Place it on a stable table handling it by its frame. After having properly positioned the machine on it working place : •... -
Page 9: Press Settings
3. ADJUSTMENT OF THE BRACKET HEIGHT According to the type of the item to mark or to adapt to the accessories of the PR 245 S (ex. cap accessory), the height of the bracket has to be modified. Turn the wheel situated on the column: clockwise to lower the bracket, anticlockwise to raise the bracket. -
Page 10: Implantation Of The Equipment
® SEFA France VI. IMPLANTATION OF THE EQUIPMENT Pressing jack Electrodistributor Microswitch timer Height adjustment start wheel Security microswitch Pressure regulator Thrust microswitch Manometer Filter Electric connector + fuses Push buttons Electronic card Page N°9... -
Page 11: Electric Diagram
® SEFA France VII. ELECTRIC DIAGRAM Page N°10... -
Page 12: Pneumatic Diagram
® SEFA France VIII. PNEUMATIC DIAGRAM Page N°11... -
Page 13: Service
® SEFA France IX. SERVICE USE BY QUALIFIED STAFF ONLY ANY MAINTENANCE INTERVENTION MUST BE DONE WHEN THE MACHINE IS OFF AND LOCKED (ELECTRIC AND PNEUMATIC ENERGIES UNPLUGGED) It is recommended to have the following tools within reach: Cruciform and flat screwdrivers... -
Page 14: Replacement Of Used Parts
® SEFA France PNEUMATIC EQUIPMENT VER-321 JACK Ø100 C50 FIL-013 FILTER MIN-015 PRESSURE REGULATOR ELE-203 ELECTRODISTRIBUTOR 5/2 G1/8 PRESS COVERING MOU-445 MOUSSE 9 mm 400 X 450 mm PEDAL OPTION PED-279 PEDAL FIN-231 SECURITY MICROSWITCH 2. REPLACEMENT OF USED PARTS The mat in silicone mousse a) Check that the plate is cold. - Page 15 ® SEFA France ANY MAINTENANCE INTERVENTION MUST BE DONE WHEN THE MACHINE IS OFF AND LOCKED (ELECTRIC AND PNEUMATIC ENERGIES UNPLUGGED) SYMPTOMS POSSIBLE BREAKDOWNS REPAIR The plug is not in Check your network and if the machine is connected to it.
-
Page 16: Maintenance Log Book
® SEFA France 5. MAINTENANCE LOG BOOK The operations of control and maintenance indicated in this table must be carried out regularly in order to check the functioning state and the reliability of the press. Heat Number Pressure Air filter...
Need help?
Do you have a question about the PR 245 S and is the answer not in the manual?
Questions and answers