Table of Contents
Advertisement
Preparation
Please read entire manual before installation.
Before You Start
• Disconnect negative battery terminal.
(consult a qualified technician for instructions)
• Avoid installing the unit where it would be subject to high temperatures,
such as from direct sunlight, or where it would be subject to dust, dirt or
excessive vibration.
Getting Started
• Remove 2 transit screws located on top of the unit.
• Remove trim ring by pulling up gently in the center.
• Insert the supplied keys into the slots as shown, and slide the unit out of the
mounting sleeve.
• Install mounting sleeve into dash opening, bending tabs to secure.
• Certain vehicles may require an installation kit and/or wiring harness
adapter (sold separately).
Unique faceplate construction and high-tech finish provide a solid
appearance during the day. Illuminite technology provides a
translucent effect at night by allowing red illumination to glow
through the faceplate - achieving a neon-like effect.
2
XD5200
INSTALLATION
Advertisement
Table of Contents
