Advertisement
Quick Links
R205 Series Wireless heating Thermostat
R205 LCD Heating Thermostat
1.General
R205 is a Radio Controlled Room Thermostat which requires no wiring and can be fitted in any
normal operating enviroment within a typical 30 meter range of the TR205 RF Transceiver. It is
available for Non-programmable and Programmable.
TR205 RF Transceiver should be mounted on a vertical flat surface near the boiler or centrial
heating wiring centre. Do not place it too close to objects which might interfere with the radio
signal. It is preferable to mount the transceiver such that an imaginary straight line between it
and the transmitter thermostat is not obscured by the boiler or any other large metal objects.
2.Technical data
2-1. Work Voltage: 3V±0.2V（DC）
2-2. Consumption: <0.06W
2-4. Accuracy: ±0.5ºC
2-6. Timing Error: <1%
3. Sizes
Thermostat Size: 136mm x 90mm x 30mm
4. Wiring
R205 LCD Room Thermostat
TR205 RF Transceiver
2-3. Load Current:2A
2-5. Set-point Range: 10.0ºC - 30.0ºC
Note: we won't provide batteries.
Transceiver Size: 130mm x 75mm x 45mm
TR205 RF Transceiver
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for JP R205 Series
- Page 1 R205 Series Wireless heating Thermostat R205 LCD Heating Thermostat TR205 RF Transceiver 1.General R205 is a Radio Controlled Room Thermostat which requires no wiring and can be fitted in any normal operating enviroment within a typical 30 meter range of the TR205 RF Transceiver. It is available for Non-programmable and Programmable.
- Page 2 R205 Series Wireless heating Thermostat 5. Installation Instruction 5-1. Use a small size screwdriver (approx. 3.5 mm 5-2.Turn up the screwdriver with a little width) insert to the notch of LCD Display unit pressure, and open the LCD unit about 4 mm.
- Page 3 R205 Series Wireless heating Thermostat 6. Keys and Function Instruction 7. Symbols Power：Power on/off. Mode: heating Setting Funtion: Timing; Programmable Non-programmable:Non-programmable & Programmable switchover; Time and Programmable setting ▲▼: Temperature setting and mode adjusting. Confirm: Confirm Menu Setting and Menu Save.
- Page 4 R205 Series Wireless heating Thermostat Press Function key for 3 seconds to switch to Non-programmable (manual) When the “ ”is flickering, please touch▲ for confirm and ▼ for cancel. 8-4.Programmable Setting (optional) Press and hold “Mode” for 3 seconds into week programable mode. Adjusting order: Monday ~ Friday first time zone time adjusting ＞Monday ~ Friday first time zone setpoint adjusting ＞...
Need help?
Do you have a question about the R205 Series and is the answer not in the manual?
Questions and answers