Hide thumbs Also See for aXess one:

Advertisement

Quick Links

USER INSTRUCTION
uvex aXess one:
Active earmuffs with Bluetooth® function for communication, audio streaming and a listening through
function called RAL (Real Active Listening). The uvex aXess one limits the sound pressure level of the
audio signal for entertainment purposes to 82dB(A). The perceptibility of warning signals at certain
workplaces may be impaired when using the sound reproduction system.
The uvex aXess one is equipped with foldable headband and continuous length adjustment.
This is a category III, harmful noise, PPE product.
Warning:
This hearing protection serves to protect against harmful noise when used in accordance with these
instructions for use. Wear the hearing protection during the entire time you are in the noise area. The
hearing protection must be checked before each use. Sealing pads may show signs of age, look for
defects or cracks and check the flexibility of the sealing pads. If damaged, do not use the hearing
protection. Replace sealing cushions twice a year to maintain seal, hygiene and comfort. Brush long
hair to the side and remove jewelry or other objects that interfere with the acoustic seal. The fitting of
hygiene covers to the cushions may affect the acoustic performance.
This earmuff is equipped with a communication device. The user should check for proper operation
before use. If distortion or failure is detected, the user should follow the manufacturer's
recommendations for maintenance. Warning. The output sound pressure level of the communication
device of this hearing protector may exceed the daily limit. This earmuff is equipped with level-
dependent sound attenuation. The user should verify proper operation before use. If battery
displacement or failure is detected, the user should follow the manufacturer's advice for battery
maintenance and replacement. Warning: performance may deteriorate due to battery wear. The typical
duration of continuous use that can be expected from the earmuff battery is 50 hours. Warning: Sound
output from the sound regeneration circuitry may exceed the external sound level. Failure to follow the
instructions may adversely affect the effectiveness of the earmuffs, resulting in hearing damage.

Storage:

Storage location, in original packaging, dry, clean, protected from light, UV and heat.
heat protected in the temperature range -10°to 55 °C, humidity max. 85%.
Storage period 5 years, from date of manufacture. Date of manufacture see product
or packaging. Make sure that during storage the headband is not stretched and the sealing cushions
are not compressed. In case of longer storage, the battery must be charged intermediately.

Useful life:

Useful life, 5 years from date of manufacture. Recommendation regular replacement of the sealing
cushions extends the useful life. Dispose of the product after expiry or immediately if it is damaged or
can no longer be cleaned.
User instruction:
1. Pull apart and put on hearing protection capsule (fig. 1)
2. Positioning the capsule by sliding it up or down at the temple ends. The ears must be completely
covered and sealed. (fig. 2)
3. Note right/left direction, the voice microphone must face forward to get good voice quality during
communication
4. Correct fit (fig. 3)

Cleaning, disinfection:

Do not use disinfectants, solvents or chemical substances for cleaning, this product may be adversely
affected by certain chemical substances. Further information should be requested from the
manufacturer. Clean with damp cloth with mild soapy water, allow to dry before reuse.
Do not immerse hearing protection in water!

Maintenance:

Replace sealing cushion, pull off old sealing cushion (Fig. 5a).
Position new sealing cushion, cushion vent downwards (Fig. 5b)
Press sealing cushion firmly all around (Fig. 5c)

Accessories:

Hygiene kit Art. No: 2599.972
Microphone covers Art. No: 259.2640
Comfort pad Art. No: 259.9978
Earmuff bag Art. No: 200.0002

Components:

Headband: Stainless steel /PVC/PUR-foam

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the aXess one and is the answer not in the manual?

Questions and answers

Summary of Contents for Uvex aXess one

  • Page 1 Active earmuffs with Bluetooth® function for communication, audio streaming and a listening through function called RAL (Real Active Listening). The uvex aXess one limits the sound pressure level of the audio signal for entertainment purposes to 82dB(A). The perceptibility of warning signals at certain workplaces may be impaired when using the sound reproduction system.
  • Page 2 Bluetooth Licence: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by UVEX ARBEITSSCHUTZ GMBH is under license. Other trademarks and trade names are those of their respective owners.
  • Page 3 Gerät, er ertönt „disconnected“. Bluetooth am zweiten Gerät aktivieren, es erscheint die uvex aXesss one am zweiten Gerät, diese nun auswählen und aktivieren. Nun kann am ersten Gerät wieder Bluetooth aktiviert werden und auch hier die uvex aXess one auswählen. Nun sind beide Geräte mit der uvex aXess one verbunden.
  • Page 4 Audio streaming: Titel Vorwärts/Rückwärts: Taste oder Taste für 2 Sekunden gedrückt halten Switch on uvex aXess one, press and hold for 5 seconds. Start music playback on the external device. Play/pause: press key Volume, louder/quieter: press key...
  • Page 5 Weight: 364g Size Range: S/M/L Tested according to European Standard EN 352-1:2020 SNR:31dB 500 1000 2000 4000 8000 Freq. Hz Mean att. dB 18.8 16.3 21.0 27.3 37.1 37.8 44.2 43.2 39.1 30.3 22.8 32.8 Std. dev. dB 15.9...
  • Page 6 Test Institute, Michael & Associates, Inc., 2766 W. College Ave Suite 1, State College, PA 16801 Notified body No. 2797: BSI Group The Netherlands B.V. Say Building, John M. Keynesplein 9, 1066 EP, Amsterdam, Netherlands Freq. - Frequency Mean att. - Mean value of attenuation Std.
  • Page 7 FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Table of Contents