Page 1
USER’S MANUAL Rattan Rocking Chair HW66722 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Before You Start Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included. Work in a spacious area, preferably on a carpet close to where the unit will be used.
Page 3
Notice: 1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable. 3. Tighten up all screws with tools gradually. 4.
Page 4
Right Frame (1pc) Left Frame (1pc) Seat Frame (1pc) Back Frame (1pc) Seat Cushion (1pc) Back Cushion (1pc) Bolt M6x60mm (2pcs) Bolt M6x40mm (2pcs) Bolt M6x20mm (6pcs) Washer M6 (10pcs) Allen key (1pc)
Page 5
STEP 1 STEP 2 Connect Left Frame (B) & Seat Frame (C) Connect Right Frame (A) & Seat Frame (C) STEP 3 STEP 4 Connect part from STEP 2 & Back Frame (D) Put on Seat Cushion (E) & Back Cushion (F) to complete rocking chair.
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish.
Page 8
Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped ASAP ! US office: Fontana UK office: Ipswich AU office: Truganina Contact Us ! Do NOT return this item. US:cs.us@costway.com UK:cs.uk@costway.com AU:cs.au@costway.com...
Need help?
Do you have a question about the HW66722 and is the answer not in the manual?
Questions and answers