Table of Contents
Advertisement
What should I do if a BIOS error appears when my computer starts?
If the message "Press <F1> to resume, <F2> to setup" appears at the bottom of the screen
1
Press the F2 key.
The BIOS setup screen appears.
2
Set the date (month/day/year). Press Enter.
m
3
Press the
key to select System Time, and then set the time (hour: minute: second). Press the Enter key.
,
4
Press the
key to select the Exit tab, and then press the F9 key.
The message Load default configuration now? appears.
5
Select Yes, and press the Enter key.
6
Select Exit (Save Changes), and press the Enter key.
The message Save configuration changes and exit now? appears.
7
Select Yes, and press the Enter key.
The computer restarts.
If this occurs on a regular basis, contact VAIO-Link.
What should I do if the power indicator (Green) lights but my screen does not display
anything when I turn on my computer?
If nothing still appears on your screen after a while
1
Press the power button for more than four seconds to check that the power indicator goes out. Then turn on the computer
again.
2
If nothing still appears on your screen, unplug the AC adapter, remove the battery, and leave the computer for about a
minute. Then plug in the AC adapter, install the battery, and turn on the computer again.
n
128
N
Troubleshooting
Advertisement
Table of Contents
