6.5. Storm Control
6.5.1.
Alarm Threshold
When the selected packet rate is over the alarm threshold, the Switch will send syslog
alarm to syslog server.
6.5.1.1. CLI Configuration
Node
Command
enable
show bandwidth-limit
enable
configure terminal
configure
bandwidth-limit
egress <0-62500>
ports PORTLISTS
configure
no bandwidth-limit
egress ports
PORTLISTS
configure
bandwidth-limit
ingress <0-62500>
ports PORTLISTS
configure
no bandwidth-limit
ingress ports
PORTLISTS
Description
This command displays the current rate control
configurations.
This command changes the node to configure node.
This command enables the bandwidth limit for outgoing
packets and set the limitation.
This command disables the bandwidth limit for
outgoing packets.
This command enables the bandwidth limit for
incoming packets and set the limitation.
This command disables the bandwidth limit for
incoming packets.
98