Belkin SOUNDFORM Rise Quick Start Manual

True Wireless Earbuds
S
M
L
All Day Comfort
Our True Wireless Earbuds come with
three sizes (S/M/L) of silicone ear tips,
providing all-day comfort and noise
isolation with its sealed in-ear fit.
Initial pairing
A
Step 1: Open the charging case of your earbuds, and the earbud's
white light will begin to blink. The blue light will show once the
earbuds are ready to pair.
SOUNDFORM
Step 2: On your mobile device, turn ON the Bluetooth to begin
Rise
searching for nearby devices.
NOTE: The steps in enabling your Bluetooth may vary depending
on your device's operating system.
Step 3: When your earbuds are detected, it will show as
SOUNDFORM Rise as a device to pair.
Tap on the name to complete the pairing.
Manual pairing
B
3 sec
Remove the earbuds from the case. Then, press and hold the touch-
sensitive buttons on the earbuds for 3 seconds. The status light on
the earbuds will blink white and blue when they are ready to be paired.
How to use the touch controls on the SOUNDFORM Rise
Audio Playback
Control
Volume up ( + )
Volume down ( - )
Pause / Resume playback
Next track
Previous track
Call Handling
Control
Accept / End call
Reject call
Virtual Assistants
Control
Activate virtual assistant
Left Earbud Right Earbud
Tap one time
Tap one time
Tap two times Tap two times
Tap three times
Tap three times
Left Earbud Right Earbud
Tap two times Tap two times
Hold for 2 seconds Hold for 2 seconds
Left Earbud Right Earbud
Hold for 2 seconds Hold for 2 seconds