CONTENTS General Safety Product Overview Remote Control Placing Projector First Time Setup Projector Lens Focus Settings Picture Sound Option Time Specifications Customer Helpline Last Page...
GENERAL SAFETY Read this manual thoroughly before you start using the Projector. Store this manual, the completed warranty card, your receipt and the product packaging. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings.
Page 5
GENERAL SAFETY (CONT.) IMPORTANT INFORMATION • Do not expose this appliance to rain or moisture as it may result in fire or an electric shock hazard • Do not tamper or change or modify the product in any way. • Only use Accessories outlined and recommended by the manufacturer. •...
Page 6
GENERAL SAFETY (CONT.) • Please beware that Dust could accumulate over time on the unit and cause it to generate heat and or deteriorate insulation, which in turn may result in an electrical fire. • The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age, They must be supervised product by a person responsible for their safety.
Page 7
GENERAL SAFETY (CONT.) Please make sure upon positioning this product, the place is: • Not wet or damp and Well ventilated • Away from direct sunlight or heaters. • Away from splashes or food. • Protected from excessive dust or grease. •...
Page 9
PRODUCT OVERVIEW (Cont.) Power Button Return / Back Button Navigation Arrows / OK button Menu Source (input) button Tilt Dial Focus Dial Lens Headphone Jack AV In Micro SD Card Slot HDMI 1 HDMI 2 USB Input DC In (power)
REMOTE CONTROL Your projector comes with a Remote Control to access and control your projector from a distance. (Batteries not included). Make sure to place the batteries into the back compartment of the remote control in the correct way. The polarities on the battery (+/-) must match the polarities on the remote control in order for the remote to work.
Page 11
REMOTE CONTROL (cont.) Using the Remote Control • Do not mix old and new batteries in the remote • Do not use different types of battery • If you do not intend to use the unit for a long time, please remove batteries from the remote to avoid accident.
PLACING PROJECTOR Your projector can be installed in four different configurations: Front Facing Table Front Ceiling (A Projector Mount is required, Not Included) Behind Projector Screen Ceiling Behind Projector Screen (Special Rear Projection Screen is (A Projector Mount is required, required, Not Included) Special Rear Projection Screen is required, Not Included)
FIRST TIME SETUP Make sure to place the projector on a flat and stable surface that is level. So that the projector projects the video/image onto the wall nice and straight. Plug in the Power cable into the DC Port of the Projector. Then plug in the other end into a wall power socket.
PROJECTOR LENS FOCUS Once you have your Projector all setup, input mode selected, power turned on. You can now adjust the focus and keystone correct (tilt forward or backwards) depending on the orientation of your projector. FOCUS Turn the dial to adjust the LENS focus. LEFT DIRECTION - Is toward larger screen sizes best focus point.
SETTING - PICTURE To Access the setting PICTURE menu: Press the MENU button located on the top of the Projector or MENU button on the Remote Control. RIGHT With the directional keys, Press the arrow button to enter PICTURE settings. To navigate back to PICTURE/SOUND/OPTION, with nothing selected, LEFT Press...
SETTING - SOUND To Access the setting PICTURE menu: Press the MENU button located on the top of the Projector or MENU button on the Remote Control. With the directional keys, Press the DOWN button, when on SOUND, Press the RIGHT arrow button to enter SOUND...
Page 17
SETTING - OPTION To Access the setting OPTION menu: MENU Press the button located on the top of the Projector or MENU button on the Remote Control. DOWN With the directional keys, Press the button, when on OPTION, Press the RIGHT arrow button to enter OPTION...
SETTING - TIME To Access the setting TIME menu: MENU Press the button located on the top of the Projector or MENU button on the Remote Control. With the directional keys, Press the DOWN button, when on TIME, Press the RIGHT TIME arrow button to enter...
Need help?
Do you have a question about the BHP720H and is the answer not in the manual?
Questions and answers