Sawyer 258 Manual

About Us

We appreciate your business!
Congratulations on your new SAWYER product. We are proud to
have you as our customer and will strive to provide you with the best
service and reliability in the industry. This product is backed by our
extensive warranty and world-wide service network. To locate your
nearest distributor or service agency, please contact us at the phone
number and address listed on the bottom of each page.
You are in good company!
Sawyer Manufacturing Company is the world leader in the design
and manufacture of pipeline and welding equipment and has been
since 1948. Sawyer equipment has become a standard in the industry
and continues to set the benchmark for quality and durability.
This user operation manual has been made to instruct you for the best
use and operation of your Sawyer product. Your satisfaction with our
products is our main goal. Please read this entire manual carefully,
noting all tips, notes and warnings. Safety always comes first.

Parts Diagram

B A
D
C
E
H
G
A. Hingeplate
B. Hinge Pin
C. Adjustable Jackbar with
Jackscrews
D. Jackbar Latch Pin
E. Reforming Jackscrews
F. Main Frame
Record the following information for warranty purposes:
Where purchased:________________________________________________
Purchase date:___________________________________________________
Equipment Serial #:_______________________________________________
F
I
G. Locking Hook
H. Hook Release Chain
I. Stable Jackbar with
Jackscrews
J. Level and Support Hook
K. Lifting Chain
Sawyer Manufacturing Company
7799 S. Regency Dr., Tulsa, OK 74131 USA
P 918.834.2550
sawyermfg.com
V1.2
J
! CAUTION
CAUTION:
Sawyer Manufacturing offers a pair of easy to use
Rim Clamps for the purpose of welding two pipes together. We
recommend two or more people for the installation of the Rim
Clamp. These clamps are not intended to be used as sole support
of the pipe nor to lift the pipe. These clamps are designed to
reform pipe only and for alignment of tees, elbows, valves or other
forged fittings. After each use clean and store in a warm, dry area.

Warranty

All products manufactured by or for Sawyer Manufacturing Company are
guaranteed against defects due to faulty workmanship or materials for twelve
months from the date of purchase.
This guarantee is limited to the repair or replacement of any parts found to be
defective, and no other liability–expressed, implied, or contingent–is assumed.
F 918.834.0318
info@sawyermfg.com
Rim Clamp
Manual
Models: 258 & 258U
(258U Ultra Rim Clamp not shown.
Operation is the same for both rim clamps. )
K
!