Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Brizo Manuals
  4. Kitchen & Bath Fixtures
  5. Trevi Cross 6716816
  6. Quick start manual

Brizo Trevi Cross 6716816 Quick Start Manual

Two handle deck--mounted roman tub faucets
Hide thumbs

Advertisement

Quick Links

Download this manual
r
r
CSA B125
ASME A112.18.1
ICC/ANSI A117.1
Models/Modelos/Modèles
6716816, 6716813
Series/Series/Seria
TrevitCross
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
For easy installation of your
BRIZOt faucet you will need:
* To READ ALL the instructions completely before
beginning.
* To READ ALL warnings, care, and maintenance
information.
Para instalación fácil de su llave
BRIZOt usted necesitará:
* LEER TODAS las instrucciones completamente
antes de empezar.
* LEER TODOS los avisos, cuidados, e información
de mantenimiento.
Pour installer votre robinet BRIZOt
facilement, vous devez :
* LIRE TOUTES les instructions avant de débuter.
* LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien.
12696.00
TWO HANDLE DECK--MOUNTED ROMAN TUB FAUCETS
t
LLAVES DE AGUA PARA BAÑERAS ROMANAS DE DOS
MANIJAS INSTALADAS EN EL BORDE
MÉLANGEURS POUR BAIGNOIRE ROMAINE -- POSE S PLAGE
6716816
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
1
6716813
3 mm
11.05d

Advertisement

loading
Need help?

Need help?

Do you have a question about the Trevi Cross 6716816 and is the answer not in the manual?

Questions and answers

Related Manuals for Brizo Trevi Cross 6716816

Summary of Contents for Brizo Trevi Cross 6716816

  • Page 1 TWO HANDLE DECK--MOUNTED ROMAN TUB FAUCETS LLAVES DE AGUA PARA BAÑERAS ROMANAS DE DOS MANIJAS INSTALADAS EN EL BORDE MÉLANGEURS POUR BAIGNOIRE ROMAINE -- POSE S PLAGE CSA B125 ASME A112.18.1 ICC/ANSI A117.1 Models/Modelos/Modèles 6716816, 6716813 Series/Series/Seria TrevitCross Write purchased model number here. Escriba aquí...

  • Page 2: Preparing Installation

    PREPARING INSTALLATION INSTALLATION OF HOT & COLD VALVE ASSEMBLY Determine which model you want to install, with or without handheld shower and A. Assemble the mounting parts to side valve (1): nut (2) Washer (3) and whether the shower is to be positioned to the right or left of the faucet. Drill 3 or 4 gasket (4).
  • Page 3 INSTALLATION OF DIVERTER BODY (for spout) INSTALLATION OF HAND HELD SHOWER Remove connection piece (1) from shower nest (2), disassemble nut (3) and On diverter body assembly, roughly adjust nut (8) to rim thickness and washer (4). disassemble top piece (9) from body (10). Insert Shower nest in to mounting surface, assemble and secure with washer Insert diverter body in to mounting surface, from underneath, assemble (4) and nut (3).
  • Page 4 MAKE CONNECTIONS TO WATER LINES Turn off water supplies and valves. The hoses supplied have ½”--14 female connections that can be used to connect Firmly secure all units after you have verified that installation is correct. directly to the water supplies. Position a bucket under the shower outlet, and depressurize the system, by re- Option: An adaptor kit has been included with adaptors and nuts for ball nose moving the cap (2).
  • Page 5 INSTALLATION OF SPOUT ASSEMBLY FLUSH YOUR SYSTEM Remove the cap (3) by loosening the set screw (4). Allen key, 3 mm. Turn on water supplies, if closed. On spout / diverter assembly, loosen the lower set screw (5) at the diverter body. Remove stream straightener from the end of spout.

  • Page 6: Mantenimiento

    MAINTENANCE MAINTENANCE SPOUT SHUT OFF WATER SUPPLIES BEFORE SERVICING VALVE If spout leaks at base of outlet -- replace O--ring. (1). ASSEMBLY If spout leaks at base of spout body -- replace O--ring. (2). Unscrew the upper / lower set screw at spout base, by using a 3 mm Allen key. If faucet leaks out of spout or around handle stem -- replace valve cartridge (1) Pull off spout / base, and replace O--ring on shank.
  • Page 7 MAINTENANCE DIVERTER If spout leaks out of diverter hole in body -- replace top seal (3). If spout leaks out of outlet with diverter in shower mode -- clean or replace O--rings (4 & 5). Unscrew the upper set screw (8), remove the spout. Unscrew the lower set screw (9), remove the diverter body Unscrew the diverter knob, the diverter stem and spring is released.
  • Page 8 RP40101s RP46403s 6716816 Flow straightener Handle base Rompechorros Base de la manija. Canalisateur de jets Base de manette. RP40103s RP46404s Spout with flow straightener Handle w/plug and screw, complete Caño con Rompechorros Manija completa con tapón y tornillo. Joint torique du manchon du bec Manette complète avec bouchon et vis RP40102 O--Ring for Spout shank...
  • Page 9 RP40101s 6716813 Flow straightener Rompechorros Canalisateur de jets RP40103s Spout with flow straightener Caño con Rompechorros Joint torique du manchon du bec RP40102 O--Ring for Spout shank Anillo--O para la espiga del surtidor Joint torique pour manchon du bec RP40104 Set screw Tornillo de presión Vis d’arrêt...
  • Page 10 This warranty excludes all industrial, commercial and business usage, whose purchasers are parts may be obtained by calling 1--877--345--BRIZO (2749) (in the U.S. and Canada) or by hereby extended a five year limited warranty from the date of purchase, with all other terms of writing to: this warranty applying except the duration of the warranty.

This manual is also suitable for:

Trevi cross 6716813