Subscribe to Our Youtube Channel
Related Manuals for Hanlong Unicorn 600 Series
Summary of Contents for Hanlong Unicorn 600 Series
- Page 1 User Manual Unicorn 600X Analog IP Gateway 4 or 8 FXS Ports Hanlong Technology Co., Ltd http://www.hanlongtek.com http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004...
-
Page 2: Table Of Contents
Access The Web Configuration Menu ..........20 Important Settings..................21 7.3.1 NAT Settings..................22 7.3.2 DTMF Methods................... 22 7.3.3 Preferred VOCODER (Codec)............22 End User Configuration ................22 Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 2 of 37 Firmware 1.0.0.29 Last Updated 8/2010 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004... - Page 3 Rebooting From Remote ................35 Screen-Shot Of Rebooting Page ............... 36 SOFTWARE UPGRADE..................36 RESTORE FACTORY DEFAULT SETTINGS............37 10 TECHNICAL SUPPORT CONTACT................ 37 Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 3 of 37 Firmware 1.0.0.29 Last Updated 8/2010...
-
Page 4: Welcome
1 WELCOME Thank you for purchasing the Hanlong Unicorn 600x Analog FXS IP Gateway. The Unicorn 600x offers an easy to manage, easy to configure IP communications solution for any business with virtual and/or branch locations. The Unicorn 600x supports popular... -
Page 5: Warranty
Warranty Hanlong has a reseller agreement with our reseller customer. End users should contact the company from whom you purchased the product for replacement, repair or refund. If you purchased the product directly from Hanlong, contact your Hanlong Sales and Service Representative for a RMA (Return Materials Authorization) number. -
Page 6: Diagram Of Unicorn 600X Back Panel
Once the Unicorn is turned on and configured, the front display panel indicates the status of the unit. Diagram Of Unicorn 600x Display Panel TABLE 2: Definitions Of The Unicorn Display Panel Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 6 of 37 Firmware 1.0.0.29 Last Updated 8/2010 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004... -
Page 7: Application Description
VoIP and the Internet. Examples Of Unicorn 600x Configurations 3.1.1 Application One: Unicorn 600x Gateway Configuration / PBX Scenario, VoIP Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 7 of 37 Firmware 1.0.0.29 Last Updated 8/2010 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004... -
Page 8: Application Two: Unicorn 600X & Unicorn 60X0 Scenario / Toll- Free Calling Between Locations
4 or 8 FXS ports respectively. Each model features flexible dialing plans, PSTN failover, integrated call routing to support a pure IP network call and an external power supply. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 8 of 37 Firmware 1.0.0.29... -
Page 9: Software Features Overview
T.38 compliant Group 3 Fax Relay up to 14.4kpbs and Fax over IP auto-switch to G.711 for Fax Pass-through, Fax Datapump V.17, V.19, V.27ter, V.29 for T.38 fax relay Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 9 of 37 Firmware 1.0.0.29 Last Updated 8/2010 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004... -
Page 10: Hardware Specification
225mm (L) x 135mm (W) x 35mm (H) Weight 0.29 lbs (3.5 oz) Temperature 32~104°F / 0~40°C Humidity 10% - 90% (non-condensing) Compliance FCC, CE Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 10 of 37 Firmware 1.0.0.29 Last Updated 8/2010 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004... -
Page 11: Basic Operations
Enter “9” to toggle between enable and WAN Port Web Access disable Announces current Firmware Server IP Firmware Server IP address. Enter 12 digit new IP address. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 11 of 37 Firmware 1.0.0.29 Last Updated 8/2010 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004... -
Page 12: Placing A Phone Call
1. Dial the number directly and wait for 4 seconds (Default “No Key Entry Timeout”); or 2. Dial the number directly and press # (Use # as dial key” must be configured in web configuration). Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 12 of 37 Firmware 1.0.0.29... -
Page 13: Direct Ip Calls
IP calls between FXS1 to FXS2 since they are using same IP. Call Hold Place a call on hold by pressing the “flash” button on the analog phone (if the phone has Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 13 of 37 Firmware 1.0.0.29... -
Page 14: Call Waiting
2. Caller A then dials Caller C’s number followed by # (or wait for 4 seconds). 3. If Caller C answers the call, Caller A and Caller C are in conversation. Then A can hang Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 14 of 37 Firmware 1.0.0.29... -
Page 15: 3-Way Conferencing
Unicorn 6008 will allow 8 concurrent calls to the same SIP number. All office members can be reached remotely using the same phone number in round robin fashion. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 15 of 37 Firmware 1.0.0.29... - Page 16 Note: A single call directed to the SIP account will NOT result in all ports ringing at the same time. They will ring in the hunting group only. This feature is applicable to incoming calls only. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 16 of 37 Firmware 1.0.0.29...
-
Page 17: Inter-Port Calling
TABLE 6: Call Features Table (Star Code) Call Features Block CallerID (for all-config change) Send CallerID (for all-config change) Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 17 of 37 Firmware 1.0.0.29 Last Updated 8/2010... - Page 18 If user hears call waiting beep, flash/hook will switch to the new Flash/Hook incoming call. Also used to switch to a new channel for a new call. Pressing pound sign will serve as Re-Dial key. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 18 of 37 Firmware 1.0.0.29 Last Updated 8/2010 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004...
-
Page 19: Configuration Guide
3) never upgrade WAN PORT WEB ACCESS Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 19 of 37 Firmware 1.0.0.29 Last Updated 8/2010... -
Page 20: Configuring Unicorn 600X With Web Browser
3. Access the Unicorn 600x Web Configuration page by the following URI via WAN port: http:// Unicorn 600x -IP-Address (the Unicorn 600x IP-Address is the WAN IP address for Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 20 of 37 Firmware 1.0.0.29... -
Page 21: Important Settings
Important Settings The end-user must configure the following settings according to the local environment. NOTE: Most settings on the web configuration pages are set to the default values. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 21 of 37 Firmware 1.0.0.29... -
Page 22: Nat Settings
End User Configuration This section will describe the options in the Web configuration user interface. As mentioned, a user can log in as an administrator or end-user. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 22 of 37 Firmware 1.0.0.29 Last Updated 8/2010 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004... -
Page 23: Status
FXS port 2 user has set his calls to be forwarded to 614 when his phone is busy. FXS port 3 user is not registered with his SIP Server. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 23 of 37 Firmware 1.0.0.29... -
Page 24: Basic Settings
End User Password Configuration Menu. This field is case sensitive. Reply to ICMP on WAN If set to “Yes”, the unicorn600x will respond to the PING Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 24 of 37 Firmware 1.0.0.29 Last Updated 8/2010 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004... -
Page 25: Super User Configuration
Layer2 Qos Value used for layer 2 VLAN tag. Default setting is blank Data VLAN Tag When using Bridge Mode, Data VLAN Tag is supported. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 25 of 37 Firmware 1.0.0.29 Last Updated 8/2010... - Page 26 By default they are set to North American frequencies. Configure these settings with known values to avoid uncomfortable high pitch sounds. ON is the period of Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 26 of 37 Firmware 1.0.0.29 Last Updated 8/2010 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004...
-
Page 27: Profile
UDP packet (with no payload data) to the SIP server to keep the “hole” on the NAT open. If choosing UPNP, the embedded UPNP client inside the Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 27 of 37 Firmware 1.0.0.29... - Page 28 DTMF Payload Type RFC2833 This parameter specifies the mechanism to transmit DTMF DTMF in Audio digit in audio which means DTMF is combined in audio Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 28 of 37 Firmware 1.0.0.29 Last Updated 8/2010...
- Page 29 Preference List or the actual used payload type negotiated between the 2 conversation parties at run time. e.g., if the first vocoder is configured as G723 and the Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 29 of 37 Firmware 1.0.0.29...
- Page 30 Use Bell-style 3-way Conference mode, default option is No. If set to yes, the feature Conference code for coference *23 would be disabled. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 30 of 37 Firmware 1.0.0.29 Last Updated 8/2010...
- Page 31 7 numbers and 1617 area code will be added automatically 1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11 digits length Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 31 of 37 Firmware 1.0.0.29 Last Updated 8/2010...
- Page 32 As a Caller, select UAC to use the device as the refresher, UAC Specify Refresher or UAS to use the Callee or proxy server as the refresher. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 32 of 37 Firmware 1.0.0.29 Last Updated 8/2010 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004...
- Page 33 User has 10 choices. Ring Tones The configuration, completed in Distinctive Ring Tones block in the same page, applies to ring tones cadences configured here. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 33 of 37 Firmware 1.0.0.29 Last Updated 8/2010...
-
Page 34: Fxs Ports Configuration Definitions
Hunting group set to "Active" FXS Port #5: SIP UserID and Authenticate ID left blank, Hunting Group set to "4" FXS Port #6: SIP UserID and Authenticate ID left Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 34 of 37 Firmware 1.0.0.29 Last Updated 8/2010 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004... -
Page 35: Saving The Configuration Changes
The administrator can remotely reboot the unit by pressing the “Reboot” button at the bottom of the configuration menu. The user can re-login to the unit after waiting for about 30 seconds. Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 35 of 37 Firmware 1.0.0.29... -
Page 36: Screen-Shot Of Rebooting Page
TFTP server’s IP address. NOTES: When Hanlong ATA boot up, it will send TFTP or HTTP request to download configuration files, there are two configuration files, one is “cfg.bin” and the other is “cfg001fc1xxxxxx”, where “001fc1xxxxxx” is the MAC address of the Unicorn 600x. These two files are for initial automatically provisioning purpose only, for normal TFTP or HTTP firmware upgrade, the following error messages in a TFTP or HTTP server log can be ignored. -
Page 37: Restore Factory Default Settings
Please BACKUP or PRINT out all the settings before you approach to following steps. Hanlong will not take any responsibility if you lose all the parameters of setting and cannot connect to your VoIP service provider.
Need help?
Do you have a question about the Unicorn 600 Series and is the answer not in the manual?
Questions and answers