Cleaning And Maintenance; Delivery Set; Specifications - Vitek VT-8180 Manual Instruction

ENGLISH
•
Connect the power adapter (12) connecting cord jack
to the charging socket, connect the power adapter (12)
to the mains.
Notes:
–
Charge the battery (8) at the temperature from +5°C
to +35°C.
–
If you haven't used the unit for a month or longer,
charge the battery (8) completely before using the unit.
•
The battery (8) charging process is shown with the indi-
cator (6). During charging the indicators flash, when
the battery is fully charged, all 3 indicators (6) will glow
constantly.
•
Disconnect the power adapter (12) from the mains
socket, disconnect the connection cord jack of the
power adapter (12) from the charging socket.
•
Full charging of the battery (8) is enough for 25-45 min-
utes of continuous operation.
Preparing the unit for use
•
Before installing the cloth attachments (11) it is recom-
mended to wet them with water and then wring them
out until damp (pic. 3).
•
Install the cloth attachments (11) on the driving discs
(pic. 4).
•
For easy centering of the cloth attachment (11), it is
recommended first to fold it in half, place it on the driv-
ing disc exactly in the middle, then unfold the cloth
attachment (11) and attach the other half to the driv-
ing disc (pic. 5).
ATTENTION!
Always make sure that the cloth attachments (11) are
centered and place them exactly in the middle of the
driving discs (pic. 6).
USING THE FLOOR SWEEPER
ATTENTION!
Switch the Floor Sweeper on only with the cloth at-
tachments (11) installed.
•
Open the water inlet lid and pour the water in with the
beaker (13), close the water inlet lid (pic. 7).
•
Before you start cleaning, remove all foreign objects
from the floor (pic. 8).
•
Extend the lower part of the telescopic pipe (5) to
the required length, having preliminarily pressed the
clamp (4).
•
To switch the unit on/off, press the button (3) (pic. 9).
•
During the operation or when carrying the Floor
Sweeper hold it by the handle (1).
•
To wet the floor with water, press the water spray but-
ton (2) (pic. 10).
Notes:
–
Use the Floor Sweeper for cleaning smooth and mois-
ture-resistant floorings. Do not use the unit for cleaning
other types of floorings.
–
Do not run over any extension cords or other cords
during cleaning.
VT-8180.indd 4
•
After you finish using the Floor Sweeper, switch it off by
pressing the on/off button (3).

CLEANING AND MAINTENANCE

ATTENTION!
Keep the cloth attachments (11) clean. After every
use of the Floor Sweeper remove the cloth attach-
ments (11) and clean them.
•
Before washing the cloth attachments (11) in a wash-
ing machine it is recommended to rinse them in warm
water and add some liquid laundry detergent on the cloth
attachments (11) (pic. 11). For hand wash, the water tem-
perature should not exceed 40°C. After washing the cloth
attachments, rinse them, wring them out and dry (pic. 11).
•
Wipe the unit body with a soft, slightly damp cloth and
then wipe it dry.
•
Never immerse the Floor Sweeper body, the recharge-
able battery (8) and the power adapter (12) into water
or other liquids. Provide that no water gets inside the
unit body.
•
Do not use any abrasives and solvents to clean the unit
body and all the parts of the unit.
STORAGE
•
Before taking the Floor Sweeper away for long term
storage, clean its body and the cloth attachments (11).
•
For long storage of the unit remove the rechargeable
battery (8).
•
Before disposing of the Floor Sweeper, remove the bat-
tery (8) and dispose of it.
•
Keep the unit in a dry darkened and cool place out of
reach of children and disabled persons.

DELIVERY SET

Floor Sweeper – 1 pc.
Rechargeable battery – 1 pc.
Telescopic extension pipe – 1 pc.
Handle – 1 pc.
Power adapter – 1 pc.
Cloth attachments – 4 pcs.
Beaker – 1 pc.
Instruction manual – 1 pc.

SPECIFICATIONS

Power supply: 11,1 V
rechargeable battery Li-Ion 11,1 V 2200 mAh
Rated input power: 50 W
Battery charging time: 4,0 hours
Water tank capacity: 0,25 L
Number of disc revolutions: 180 rev/min
Cleaning area: 90-100 m 2
Power adapter:
Power supply: 100-240 V ~ 50/60 Hz 0,2 A
Output voltage: 14 V 0,5 A 7,0 W
4
9/11/20 10:44 AM