Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Rema Tip Top Manuals
  4. Water Filtration Systems
  5. EXPEL 30
  6. Faq

Rema Tip Top EXPEL 30 Faq

Filter & auto drain set
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
FREQUENTLY
ASKED
QUESTIONS
EXPEL 30 FILTER & AUTO DRAIN SET
FREQUENTLY ASKED QUESTIONS

Advertisement

loading
Need help?

Need help?

Do you have a question about the EXPEL 30 and is the answer not in the manual?

Questions and answers

Summary of Contents for Rema Tip Top EXPEL 30

  • Page 1 FREQUENTLY ASKED QUESTIONS EXPEL 30 FILTER & AUTO DRAIN SET FREQUENTLY ASKED QUESTIONS...
  • Page 2 No power source is required.  If needed, the Automatic Float Drain can be easily dismantled for servicing and cleaning. WHAT SIZE IS THE UNIT? As a guide, the physical size of the EXPEL 30 which is most commonly seen in workshop applications is 293mm High x 80mm Diameter. WHAT GRADE OF MATERIAL IS EXPEL MANUFACTURED FROM? Th e external body and head of the EXPEL unit are manufactured from Grade 304 stainless steel.
  • Page 3 WHAT IS THE PRESSURE DROP ACROSS THE FILTER? Th e maximum pressure drop across the EXPEL 30 is 0.1 bar (1.45 PSI). Unlike conventional fi lters, the EXPEL does not retain the particulates it removes, so the pressure drop does not increase over time, saving energy costs and improving overall system performance.
  • Page 4 WHAT SIZE EXPEL DO I NEED? Typically, the most common EXPEL fi lter for automotive and workshop applications is the EXPEL 30. Th is units handles a compressed air fl ow from 5-30 CFM (140-850 L/Min). Most tools and compressed air equipment will state on a label what compressed air usage they require.

  • Page 5: Installation

    WHERE DO I NEED TO POSITION THE EXPEL IN MY COMPRESSED AIR SYSTEM? Th e EXPEL 30 is a point of use fi lter. We recommend installation within 18 ft. of point of use. Th is is to minimize the effects of temperature reduction after the fi lter, preventing downstream condensation.

  • Page 6: Operation

    HOW DO I DRAIN THE EXPEL UNIT? Th e EXPEL 30 unit comes equipped with an Automatic Float Drain. Th is fl oat drain is designed to discharge liquids and particulates extracted from your compressed air system. Th e Auto Float Drain is screwed directly to the base of the EXPEL unit and has an operation pressure up to 232 psi.
  • Page 7 EXPEL 30 FILTER & AUTO DRAIN SET FREQUENTLY ASKED QUESTIONS FURTHER FAQ’S DOES THE EXPEL ‘CONSUME’ COMPRESSED AIR? Th e EXPEL does not ‘consume’ any of the air that a compressor produces. Th is ‘volume’ or ‘fl ow’ of air passes directly through the Expel unit.
  • Page 8 REMA TIP TOP Product & Solutions CONVEYING SOLUTIONS Pulley Lagging Skirting Other • PERFORMANCE GRIP 70 • REMASKIRT • Conveyor Belting • REMAGRIP • Combi-Skirt • REMACLEAT • REMAGRIP Ceramic Lagging • T-REX • Edge Wall • UNIGRIP • UNISKIRT •...