Advertisement
Quick Links
Advertisement
Summary of Contents for SMITH SYSTEM Planer Studio 77248
- Page 1 Assembly Instructions PLANNER STUDIO POWER STRIP ASSEMBLY INSTRUCTIONS Document #: 179682 10/2019...
- Page 2 Hardware and Components BOLT ON POWER STRIP BACK BRACKET QTY. 1 BOLT ON POWER STRIP BRACKET QTY. 1 5/32 ALLEN KEY 1/4”-20 X ½” SOCKET CAP SCREW QTY. 1 QTY. 4 Document #: 179682 10/2019...
-
Page 3: Special Notes
Special Notes: • Check that all components are accounted for and undamaged before assembling. • Please assemble the product in a clean and dry area. • Clean the product with a mild cleaner and a damp cloth. If you have damaged or missing components, please contact customer service at 1-800-328-1061 Document #: 179682 10/2019... - Page 4 Assembly Instructions 1. Place the bolt on power strip back bracket on the inside of the planner studios cross brace. It will fit inside the rectangular cutout. Helpful Hint: It is possible to attach this bracket to a fully assembled Planner Studio Table with the top already on it.
- Page 5 2. Using the included 5/32” Allen key, insert and tighten the 4x ¼-20 x 1/2” screws as shown. Helpful Hint: The bolt on power strip bracket can be mounted in increments of 90 degrees. Document #: 179682 10/2019...
- Page 6 3. Optional: The power cord can be routed into the cross brace and back out for cable management. Document #: 179682 10/2019...
- Page 7 Document #: 179682 10/2019...
Need help?
Do you have a question about the Planer Studio 77248 and is the answer not in the manual?
Questions and answers