Advertisement
Trouble-shooting
Problem
It's normal to hear some noise when turning the piano on or off.
A noise is heard when turning on or
The noise may be due to interference caused by the use of a mobile
off the piano.
phone in proximity to the instrument. Turn off the mobile phone, or
place it far away from the instrument.
Speakers do not work when playing
Check if the volume is too low or completely turned off. Then check if anything is
the piano
plugged into the earphone socket.
SPECIAL NOTICE
Warning
Functions of the product may be subject to strong
electromagnetic interference. If it happens, simply follow
the user manual to restore the initial settings. When the
product stops working, store it in an unused location.
Interference with other devices
Do not use the instrument in the vicinity of a TV, radio,
stereo equipment, mobile phone, or other electronic device.
Otherwise, the instrument may generate noise.
Maintenance
When cleaning the instrument, use a soft and dry cloth.
Do not use paint thinners, solvents, cleaning fluids, or any
chemical cleaning cloths.
12
Possible cause and solution
Caution
Do not press too hard on switches or controls.
Avoid getting paper, metal or other materials into the
internal device. If this happens, unplug the device immediately.
Then ask for help from a qualified service personnel to inspect
the equipment.
Before moving the instrument, remove all connected cables.
Before using the product, please read the following instructions
carefully.Please keep this manual for inspection at any time in
the future.
Power
Please make sure that the power adapter is connected to a Power
outlet with the correct voltage.
Do not use a power source with the wrong voltage.
When the device isn't in use, or during a thunderstorm, disconnect
the power supply.
Connection
Before connecting the product to another device, first
turn off the power on both devices. This will effectively
prevent equipment breakdowns or possible damage to
the other device.
Location
Do not place the product in the following environments in
order to avoid deformation, discoloration, or other serious damages.
Do not expose the instrument to excessive dust or vibrations, or
extreme temperatures (such as in direct sunlight or near a heater),
or in a car to prevent panel disfiguration or possible damage to the
internal components.
Do not place vinyl, plastic or rubber objects on the instrument,
since the panel or the keyboard may get discolored.
CONTACT US
Email: support@smartpiano.com
Facebook: facebook.com/onesmartpiano
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolledenvironment. This
equipment should be installed and operated with a
minimum distance of 20cmbetween the radiator &
your body. This transmitter must not be co-located or
operating inconjunction with any other antenna or
transmitter.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Advertisement
