Battery Installation And Instructions - Learning Resources Circuit Explorer Rocket Mission Manual

1x
A6
P2
2x
W1
1x
P1
STICKERS
3X AAA
1
3X AAA
1
Battery Installation
and Instructions
1. Use a Phillips-head screwdriver to remove the
battery door screws.
2. Battery packs require three AAA batteries
each, not included.
3. Batteries must be inserted with the
correct polarity.
4. Do not mix old and new batteries.
5. Do not recharge non-rechargeable batteries.
6. Do not mix different types of batteries:
2
alkaline, standard (carbon zinc), or
rechargeable batteries.
7. Only use batteries of the same or
equivalent type.
8. Remove exhausted batteries from the units.
9. Do not short-circuit the supply terminals.
10. Only charge rechargeable batteries under
adult supervision.
11. Remove rechargeable batteries from the toy
2
before charging.
12. This toy is not to be connected to more than
the recommended number of power supplies.
To prevent corrosion and possible damage to the
product, it is recommended to remove the batteries
2 X
from the units if they will not be used for more
than two weeks.
5