Oven Removal / Partial Removal - GE Advantium 240 Technical Service Manual

https://appliancetechmanuals.com

Oven Removal / Partial Removal

To remove the oven from cabinet or wall opening:
This oven requires 2 people for complete
WARNING:
oven removal. Grasp the bottom of the oven at the
front and rear on each side.
Do not use the oven handle to lift or lower
Caution:
the oven. Damage will occur.
1. Disconnect power from the oven.
2. Open the door and remove the wire rack,
aluminum baking sheet, glass tray, metal tray,
and turntable.
3. Remove 4 screws from the side trims.
4. If the oven utilizes an accessory drawer, remove
the 4 screws from the drawer side fl anges.
5. Slide the oven forward approximately 11 inches
to access certain components.
In the following step, the bottom trim is not
Note:
used if the Advantium oven is installed with an
accessory storage drawer.
6. Remove the 3 brass screws from the bottom of
the trim.
7. Disengage the tabs on the trim from the bottom
of the oven.
8. Carefully remove the oven completely from the
cabinet or wall opening.
9. Disconnect oven wiring from junction box and
lower the oven onto a protected surface.
– 24 –
p
(Oven shown without
accessory storage drawer.)