ManoMano ME901 User Manual

Wireless smart thermostat user manual

Application

ME901 is smart wifi wireless low power consumption heating
thermostat with LCD display. It' s designed for electric actuated
valve control of water heating system. It' s weekly programmable
and possible to set 6 periods each day with different temperature.
Through temperature valve between room environment and
setting temperature, it's possible to control heating through
wireless remote and App, you can also choose manual control
and period control.
User operation:
Power key : Press " " to turn the thermostat on or off.
Mode key : Press " " to switch " period control mode" or
"manual mode . "
+ - + -
Up/down key : Press "
adjust the system parameter.
Clock key : Press " " to set time and week when the
thermostat is on.
Lock key : Press"-" button for 5 seconds, if the lock icon
appears in the key right corner of the display, it indicates the
lock is successful.

Anti-frozen function

In the state of shutdown, the thermostat will turn on the heating
device automatically, When the room temperature is below 5℃ .
when the room temperature is above 7 ℃ , the thermostat will
turn off the heating device automatically.
Programming
In the shutdown state, long press "mode" key for 5 seconds to
enter programming mode, you can switch the parameter by"
In the first period under entering programming mode, press"
to adjust hours, press" " again to adjust minutes, then press"
to adjust the temperature. The next period setting is same as
first period.
Programming icon:
1 .Wake-up 2. Leave 3 Return(am)
5.Return(pm) 6.Sleep
Time
Key Event
Weekend
Advanced setting
Press" " for 5 seconds，then enter the mode of advanced setting ，
when the thermostat is off. The following functions can be switched
by" " ， and press to set the parameters.
Pair Code
_
+
Power
Heating on
" to set the temperature and
4.Leave(pm)
Default
+/ -
+/ -
value
Symbol
Setting
Temperature
1
calibration
2 Switching
differential
3
Anti-frozen
function
Kinds of periods
4
of time mode
5
Max .temperature
Set the lower limit
6
of temperature
Reset to factory
7
settings

Technical data

1,Power supply: 2 pcs No.7 battery 2, Temperature
3,Temperature accuracy : ±1℃
5,Power consumption : <1W
7, Ambient temperature: 0~50℃ 8, Load current: 3A
9,Wireless receiver: AC230V,50/60Hz
10,Wireless transmission
11,Wireless frequency:868MHZ/433MHZ
12,Wifi protocol: Tuya
14,Electrical safety standards:GB14536.1-2008 GB14536.10-2008

Thermostat icon

Week
Time
Setting
Temp
Mode
Anti-
frozen
Heating
Receiver icon
WIFI key
Pair operation
1,Press power button on receiver for 5 seconds, then enter coding
".
status, while the red power indicator flicker.
"
2,When the thermostat turns off, press " power button" for 5
"
seconds to enter coding status. When the thermostat displays
address " 0000" , then press
clock button to switch " high or low"
adjust address parameter, press mode button to confirm.Until the
red light on receiver stops flickering (it means pair code failed, if
red light flickers), press mode button again to confirm, when the
screen displays " ADDR"
When the screen display"
with receiver.
Thermostat mounting steps
1,Use screw to make plate fixed in box.
2, Mount the thermostat into plate.
Receiver mounting steps
Default +
value
Adjust measured temperature range:-9~9°C
-2
Adjust switching differential range:1-5℃
1℃
Turn on(01)/off(00) Anti-frozen function
ON
OF : Close 01:5+2 day mode
01
02:6+1 day mode 03:7 +0day mode
40
Adjust range:30℃~90℃
Adjust range:5℃~20℃
10
Press"+"and hold for 5s, all parameters will de rest
4,Temperature range:0~90
6,Temperature setting range:
distance: 100~200m in the open area.
13,WiFi frequency:2.4G
_
Room
Locking
Connect
Temp
Pair code key
Power indicator
Heating on indicator
button, the " 0000" flicker, press
mode
address, press "+ - " button to
it' s successful. Press power button to exit.
, it has
" been successful to connect
Thermostat placing steps
_
+
1, Put the stand into the pedestal
2, Put the thermostat with stand
on the desk.
or
-
sensor: NTC
℃
5~90℃
Clcok key
Down kek
+
Up key
Mode key