Lasko CT32960C Instruction Manual

Digital ceramic tower heater with remote control

Table of Contents

Available languages

Download this manual

Used for Model:

CT32960C

www.lasko.com/product-registration/

You will benefit from:

- Efficient and enhanced support

- Future product updates

Have a Question? Need a Part?

Please Do Not Return Product to Store!

Contact Lasko Customer Service:

(800) 233-0268 Monday-Friday 8AM - 5PM EST.

(Valid in the USA, its Territories, and CANADA Only)

Rev. A 6/21

READ AND SAVE THESE INSTRUCTIONS

Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others

by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage!

This Heater is intended for use as supplemental heat. This Heater is for residential use only. It is not intended to be used in

commercial, industrial or agricultural settings.

Digital Ceramic Tower Heater

Remote Control

with

Instruction Manual

Since 1906

CT32960CEF

Table of Contents

Need help?

Do you have a question about the CT32960C and is the answer not in the manual?

Page 1 Please Do Not Return Product to Store! Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others Contact Lasko Customer Service: by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! (800) 233-0268 Monday-Friday 8AM - 5PM EST.
Page 2 • Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this Heater. If this occurs, move the Heater to another location. • Keep Heater remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the Heater. Model CT32960C Lasko Products, LLC 820 Lincoln Avenue...
Page 3 Parts Included 1 Body 4 Remote Control 2 Support Base A 5 Thumb Screws 3 Support Base B 6 Remote Screw *Tool Required: #2 Phillips Head Screwdriver (not included) Assembly 1. Assemble the base by snapping Support 2. Thread the Power Supply Cord 3.
Page 4 WHAT LASKO WILL DO: Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or replace the whole product with the same or comparable model.