Failure Analysis - Dexter Laundry E120 Safety Instructions

3.FAILURE ANALYSIS

problem 1: When charging the battery pack, the charging indicator does not light when the charger is
connected to the AC poer supply.
Reasons and solution:
1. poor contact: Please pull out the battery pack and reconnect to charge.
2.The battery pack is bad: After the charger is connected to the AC power supply, the charging indicator
light is on but the battery still cannot be charged. Please replace the battery pack.
problem 2: The machine does not work or stop working after rotating slowly when conneting the
battery with the machine.
Reasons and solution:
The battery is in low power.Need to charger the battery pack before operating.
4. ENVIRONMENT
Power tools that are no longer usable should not be disposed of with household waste but in
an environmentally friendly way. Please recycle where facilities exist. Check with your local
council authority for recycling advice.
material decreases pollution in the environment. Please recycle packaging where facilities
exist.Check with your local council authority for recycling advice.
Application area
The battery is designed for use in temperate regions with a characteristic temperature of 0 ° C to + 45 ° C, relative humidity not more than 80%,
the absence of direct exposure to atmospheric precipitation and excessive dust content of the air.
Requirements for room conditions
steam.
Storage conditions
Shelf life - 4 years provided that the products are stored indoors with natural ventilation in the package at an air temperature of -20 ° C to +40 °
C and a relative humidity of not more than 80%.
Transportation conditions
Transportation of products can be any kind of closed transport in the packaging of the manufacturer or without it, preserving the product from
mechanical damage, precipitation, exposure to chemically active substances and compliance with precautionary measures for the transport of
fragile goods
the ignition of dust,