Advertisement
Activation
For the best experience, the device should be used with the
FlashTrak web service (https://flashtrakrtl.com). This will enable
real time monitoring and alerting capabilities. For more information,
contact Salesinfo@deltatrak.com.
FlashLink RTL Real-Time Data Loggers are intended to be used with
FlashTrak cloud services (https://flashtrakrtl.com)
1. Setting
Alarm thresholds can be
changed via the web app.
The flashtrakrtl.com web
portal enables users to:
•
Change the
temperature thresholds
•
Add alarm notification
personnel
•
Share shipment data
with non registered
users.
•
Set location notification
•
Set up automatic flight mode
2. Start
Press and hold the Start/Stop Power button until
REC is displayed on the LCD screen. The device is
now active. The number of temperature records will be
displayed on the LCD screen.
(Use the default alarm thresholds or change the alarm
thresholds via Deltatrak web app flashtrakrtl.com).
3. Checking the Data
Data is logged every 5 minutes, and uploaded to the cloud service
every 15 minutes, as long as there is a cellular connection. When there
is no cellular connection, the data is recorded in memory. When the
cellular connection is re-established, the RTL logger will upload all data
points stored since the last upload.
Data can be reviewed from the LCD at any time during the logging
52510053
Feb 01/21
MDL 22371
4
Advertisement
