Advertisement
– Destination Address: Outside Any (Outside Any is a predefined address
– Service: Any (Any is a predefined value for any IP service.)
– Action: Permit (Allows the traffic defined by the Access Policy to traverse
– Leave the rest of the options at their default values, and click the OK
The Outgoing Access Policies page now has one Access Policy that permits
any inside traffic to pass through the firewall and access the Internet.
&KDQJLQJ WKH $GPLQLVWUDWRU /RJLQ 1DPH DQG 3DVVZRUG
To change the default administrator login and Password via the WebUI:
1. Select the Admin button in the menu column to view the Admin page, as
shown in Figure 3-9.
D†‡hyyr…·†ÃBˆvqr
for all locations on the Untrusted network, usually the Internet.)
the firewall.)
button.
Note: For further information and examples on other configuration options,
please refer to the NetScreen Concepts & Examples ScreenOS Reference
Guide.
Figure 3-9 The Administration Settings Page
ÃÃÃ
8‚svtˆ…vtÉvhÇurÃXriVD
"
Advertisement
