Page 1
L L e e G G u u i i d d e e d d u u P P r r o o p p r r i i é é t t a a i i r r e e Before Returning, Call Eureka Customer Service Antes de enviar de regreso, Ilame al Servico al Cliente de Eureka Avant de le retourner, appelez le service à la clientèle Eureka HELPLINE LIGNE D’AIDE...
Page 2
Eureka vacuum cleaner. Inspection Carefully unpack and inspect your new Eureka vacuum cleaner for shipping damage. Each unit is tested and thoroughly inspected before shipping. For instructions regarding any shipping damage, call Eureka Customer Service HELPLINE 1-800-282-2886 immediately.
Page 3
If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Motor Do Not Oil the motor or the brush roll at any time. The bearings are permanently lubricated and sealed. Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com...
Page 4
Brush Roll & & REMOVE FILTER FRAME LAY FLAT UNLOCK DOOR REPLACE FILTER REPLACE DOOR LOCK MONTHLY BRUSH ROLL – Clean EXT-U BELT – Replace a worn, cut or out of shape belt 2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com...
Page 5
1) If model has additional stair hose, attach to end of hose. 2) Attach Power Paw to the end of wand or hose. Make sure you turn off vacuum before removing debris from Power Paw. Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com...
Page 6
3) Push in new bulb, replace lens cover and replace screw back into place (Fig. 8). 4) Replace HEPA filter, filter door, foam Fig. 7 Fig. 8 filter and frame and secure dust cup. www.eureka.com Eureka Customer Service HELPLINE 1-800-282-2886...
Page 7
What Eureka Will Do may not apply to you. Eureka will, at its option, repair or replace a defective Your relief for the breach of this warranty is limited to vacuum or vacuum part that is covered by this warranty.
Page 8
30 minutes before attempting to use the vacuum. After the 30 minute period, plug the vacuum back in and turn on the switch. If the vacuum still does not work, take it to a Eureka authorized service center for repair or call 1-800-282-2886.
Need help?
Do you have a question about the 8800-8849 Series and is the answer not in the manual?
Questions and answers