Change Measurement Settings; Data Analysis - FingerTip Pulse Oximeter Quick Start Manual

Change measurement settings. You can change
any of the measurement settings by pressing and
holding down the power button while the
desired setting is highlighted. Selecting +/- and
holding down the power button will set the way
the numbers are changed (+ to increase the
number, and – to decrease the number).

Data Analysis

Enter data analysis mode. Hold down the power
button to scroll between pages until you reach
the data analysis page 3/3 as shown above.
Begin a new analysis. Select Record. Hold down
the power button until the record status is on.
When the prompt asks to delete all data, select
OK. Return to page 3/3 and select Exit. Insert the