2. Overview and Abbreviations
Button A
Button B
3. Start-up
3.1. Content
The following items are included:
- Spintso referee watch S1 PRO.
- USB charging cable.
- Quick start manual & information sheet.
3.2. Peel off
Before using your new watch, please remove the screen protector and the thin transparent plastic film
that covers the heart rate sensor.
3.3. Activation
Press and hold Button A until the bar on the screen rises to maximum. Then release the button.
Spintso logo arcs shall appear for a moment and when the clock face appears the watch is ready.
4. Charging
Connect the included charging cable between your watch and a
standard USB-A charging port. Make sure the pogo pins on the
charging clip align properly to the watch charging interface. If wet,
the watch exterior shall be wiped dry before charging.
The watch will briefly light the display and indicate charging when
charging power is applied.
Charging time is up to two hours and is complete when the display
shows a fully charged battery. Press button A to see current charg-
ing status.
Heart rate
Sensor
Charging
interface
Latch for
bracelet
User Manual, Spintso Referee Watch S1 PRO, vers 2.0
4 (30)
5. Connect to app
5.1. SMARTPhone installation
Search for "Spintso watch" on the App Store for iPhone, or on
Google Play for Android. Install Spintso App on your phone.
5.2. Connect watch
Check that Bluetooth is enabled on your phone and on your watch.
Phone: Normally a Blue Bluetooth symbol.
Watch: White flight mode symbol. (Default)
Open the Spintso watch app on your phone and select the "WATCH" tab. Then select "ADD SPINTSO
WATCH". Wait until your Spintso watch appear in the list below and then select S1 PRO. Finally con-
firm the new pairing by selection on your watch.
The Spintso App may ask you to update the watch software. If battery status is greater than 50% you
can select yes to update.
User Manual, Spintso Referee Watch S1 PRO, vers 2.0
5 (30)
21/12, onsdag
Need help?
Do you have a question about the S1 Pro and is the answer not in the manual?